F5F Stay Refreshed Hardware Desktop CPU performance drops when under stress, but I don't understand the cause.

CPU performance drops when under stress, but I don't understand the cause.

CPU performance drops when under stress, but I don't understand the cause.

Pages (2): Previous 1 2
P
PAUUN_
Member
52
12-17-2020, 03:01 AM
#11
It seems the system is responding oddly. Disabling Turbo Boost and adjusting the core ratio might help. On many boards this can resolve issues, though it’s possible on some Gigabyte models there’s a special fix. I’m still adjusting, as the previous Intel Gigabyte board I used had a very different BIOS setup, making it hard to pinpoint the exact changes needed.
P
PAUUN_
12-17-2020, 03:01 AM #11

It seems the system is responding oddly. Disabling Turbo Boost and adjusting the core ratio might help. On many boards this can resolve issues, though it’s possible on some Gigabyte models there’s a special fix. I’m still adjusting, as the previous Intel Gigabyte board I used had a very different BIOS setup, making it hard to pinpoint the exact changes needed.

T
torri10
Member
118
12-17-2020, 11:27 AM
#12
I removed Intel XTU just in case it was altering BIOS settings, but it didn’t affect anything. In HWinfo I noticed it’s surpassing its power limit. It could be another setting is restricting it, but I’m not sure where to look. -_-
T
torri10
12-17-2020, 11:27 AM #12

I removed Intel XTU just in case it was altering BIOS settings, but it didn’t affect anything. In HWinfo I noticed it’s surpassing its power limit. It could be another setting is restricting it, but I’m not sure where to look. -_-

E
ExoTic_Killion
Junior Member
14
12-17-2020, 05:53 PM
#13
Later tonight I plan to retrieve the board from storage and check it out, but everything displayed on your screens suggests it should already be ready. It might be useful to perform a complete Cmos reset and reinitialize all configurations, just in case something went wrong (I've noticed some unusual occurrences).
E
ExoTic_Killion
12-17-2020, 05:53 PM #13

Later tonight I plan to retrieve the board from storage and check it out, but everything displayed on your screens suggests it should already be ready. It might be useful to perform a complete Cmos reset and reinitialize all configurations, just in case something went wrong (I've noticed some unusual occurrences).

P
PunjabiAK74U
Member
73
12-21-2020, 10:23 PM
#14
I believe I identified the issue. After performing a CMOS clean and turning on XMP, the same problem persists despite reinstalling Intel XTU and increasing the Core IccMax from 120A to 160A. Now I'm reaching 4.7GHz across all cores. That was the main constraint. XTU indicated this, but I hesitated to adjust it further. Thanks for your assistance!
P
PunjabiAK74U
12-21-2020, 10:23 PM #14

I believe I identified the issue. After performing a CMOS clean and turning on XMP, the same problem persists despite reinstalling Intel XTU and increasing the Core IccMax from 120A to 160A. Now I'm reaching 4.7GHz across all cores. That was the main constraint. XTU indicated this, but I hesitated to adjust it further. Thanks for your assistance!

Pages (2): Previous 1 2