F5F Stay Refreshed Hardware Desktop CPU Clock Speed Problems

CPU Clock Speed Problems

CPU Clock Speed Problems

Pages (2): Previous 1 2
T
Tavado
Senior Member
505
05-02-2018, 10:12 AM
#11
The power cap was active, along with EDP limits. The thermal throttle was toggling. Consider adjusting settings or checking for issues.
T
Tavado
05-02-2018, 10:12 AM #11

The power cap was active, along with EDP limits. The thermal throttle was toggling. Consider adjusting settings or checking for issues.

D
Domarus
Member
241
05-08-2018, 05:56 PM
#12
Users often adjust XTU settings to lower the CPU voltage. This helps save energy and decrease heat output. It also enables the CPU to operate more efficiently for longer periods before turbo throttling begins. In some cases, you might prevent throttling entirely, though this varies by laptop model. Starting with an under-voltage of -100 mV is a common initial point. If your device shows instability, you may need to lower the voltage further and conduct additional tests.
D
Domarus
05-08-2018, 05:56 PM #12

Users often adjust XTU settings to lower the CPU voltage. This helps save energy and decrease heat output. It also enables the CPU to operate more efficiently for longer periods before turbo throttling begins. In some cases, you might prevent throttling entirely, though this varies by laptop model. Starting with an under-voltage of -100 mV is a common initial point. If your device shows instability, you may need to lower the voltage further and conduct additional tests.

C
cuboidplayz
Junior Member
2
05-09-2018, 02:46 PM
#13
Adjust the CPU voltage in small steps of .025v each time you reduce it. Test performance and check stability, running benchmarks for about ten minutes. Continue this process, increasing voltage by 0.005 until crashes stop. Once stable, extend the benchmark to 60 minutes to confirm consistent performance.
C
cuboidplayz
05-09-2018, 02:46 PM #13

Adjust the CPU voltage in small steps of .025v each time you reduce it. Test performance and check stability, running benchmarks for about ten minutes. Continue this process, increasing voltage by 0.005 until crashes stop. Once stable, extend the benchmark to 60 minutes to confirm consistent performance.

Pages (2): Previous 1 2