Could fiber internet improve your situation?
Could fiber internet improve your situation?
It seems the device resembles an ONT, allowing any router to function properly by providing fiber on one side and Ethernet out on the other. This contradicts the advice to purchase a dedicated fiber router, which is typically meant to replace a single unit.
It seems the tiny device is meant to convert signals, but it appears to be a confusing arrangement since fiber enters and exits through it, connecting to a router that already has a built-in fiber port. The dark cord looks similar to fiber, though it's hard to confirm definitively.
they provided me with the black cable on the left side. A technician arrived and used a device to link both ends, handing me a small cabinet for attaching a patch cord. The connection goes directly to the router, which is ONT. I’m sure this setup uses pure fiber. The router model is a FiberHome AN5506-4 F. They informed me that my equipment only works with this brand, and from some networking experts they’re a reputable Chinese manufacturer. It was unusual for me to see how they do it abroad, but the FTTH initiative here makes sense. These converters are typically installed underground in durable tubes, but for them it’s more economical to provide a dedicated line at your home.
it's still not turned on yet (hopefully tomorrow), but yesterday they tested the connection and did a speed test. We got 192 Mb download, 184 Mb upload, no packet loss, just under 1 ms jitter and 55 ms ping. This is the first time I've felt this satisfied in my life.
It seems like you're looking for a straightforward setup. You could run the fiber directly into the home and connect both boxes. Theoretically, you might swap the router that handles the yellow fiber for one with an SFP port, but you'd need a GPON single-mode SFP matching the right wavelength and loss characteristics—this can be complicated. Once online, check if your router supports DMZ, pass-through, or bridge modes, which would let you place your own router behind it without double NAT.
I really don’t want to do that since it’s been very tiring, stressful, and expensive—especially with all the costs for cables, the router, and installation. Right now I’m not satisfied with the situation.
This installation has an internal splice point which seems unusual since it adds extra connectors than needed. It makes more sense in a multi-unit building with multiple ports, allowing easier customer additions if a plug point exists. A single port is problematic. Typically, splice boxes are placed outside for quick repairs without entering private property. Keeping it inside would be inefficient—connectors should be on the cable ends, not hidden inside.
It doesn’t really make sense, but it seems powerful when you see it in person. It felt strange at first because it was unlike anything I’d encountered before. Even though it might break, I’m confident they’ll repair it without any issues.
I think coax really helped me out. My local fibre was poor, causing frequent connection drops and daily router restarts because of network problems. I’ve even seen download and upload speeds hovering around 0mbps on speedtest.net, with a max of just 50-60mbps. Coax (DOCSIS) has always provided stable performance, solid ping and download speeds. Even though I’m not certain it was fibre, it was marketed as such. In general, fibre should outperform coax.
based on the speed we got yesterday im 99% confident its gonna be amazing and i can finally set my old ADSL router to fire and probably give humanity a better place to live