F5F Stay Refreshed Hardware Desktop Compatibility inquiry about RAM/CPU (will it function with this, etc.)

Compatibility inquiry about RAM/CPU (will it function with this, etc.)

Compatibility inquiry about RAM/CPU (will it function with this, etc.)

J
jesse_64
Member
108
09-09-2022, 06:37 AM
#1
You mentioned it yourself, and officially the system handles up to 4800 MT/s. DDR5 at 6000 MT/s could work with XMP settings, though overclocking isn't assured. Intel usually doesn't rely as much on fast memory compared to AMD.
J
jesse_64
09-09-2022, 06:37 AM #1

You mentioned it yourself, and officially the system handles up to 4800 MT/s. DDR5 at 6000 MT/s could work with XMP settings, though overclocking isn't assured. Intel usually doesn't rely as much on fast memory compared to AMD.

I
Interstar12
Junior Member
7
09-10-2022, 11:18 AM
#2
@Eigenvektor Due to my lack of reading so a bit of a embarrasing first post & I have answerd my question now the ram I was looking at says it is plug & play at 4800 MT/s it just goes up to 6000 MT/s says this on Amazon & the official Kingston Site so it should work fine I didn't see the plug & play part
I
Interstar12
09-10-2022, 11:18 AM #2

@Eigenvektor Due to my lack of reading so a bit of a embarrasing first post & I have answerd my question now the ram I was looking at says it is plug & play at 4800 MT/s it just goes up to 6000 MT/s says this on Amazon & the official Kingston Site so it should work fine I didn't see the plug & play part

M
Myloit
Member
145
09-10-2022, 07:14 PM
#3
It's inefficient to purchase memory capable of up to 6000 MT/s and then operate it at its standard rate of 4800 MT/s. If XMP isn't a priority, consider saving costs by opting for a slower solution. You don't have to avoid it entirely—most systems will function properly once XMP is activated in the BIOS. If it fails, you can either stick to its JEDEC speed of 4800 MT/s or attempt a lower XMP profile or manual overclock.
M
Myloit
09-10-2022, 07:14 PM #3

It's inefficient to purchase memory capable of up to 6000 MT/s and then operate it at its standard rate of 4800 MT/s. If XMP isn't a priority, consider saving costs by opting for a slower solution. You don't have to avoid it entirely—most systems will function properly once XMP is activated in the BIOS. If it fails, you can either stick to its JEDEC speed of 4800 MT/s or attempt a lower XMP profile or manual overclock.

C
ChloeET
Senior Member
736
09-11-2022, 10:29 PM
#4
I think it should work as expected right away. I just wanted to confirm it functions properly out of the box since 6000 MT/s seems like a solid capacity. The extra flexibility is definitely a plus.
C
ChloeET
09-11-2022, 10:29 PM #4

I think it should work as expected right away. I just wanted to confirm it functions properly out of the box since 6000 MT/s seems like a solid capacity. The extra flexibility is definitely a plus.

B
Babyl0l
Member
201
09-15-2022, 03:12 PM
#5
Varies by manufacturer. By default, RAM operates at JEDEC standards, which can range widely—from 4000 to 6400 MT/s. Yet JEDEC ratings often include extra latency. For typical products labeled at 6000 MT/s, XMP must be activated to achieve better performance. Without it, speeds drop to around 4800 MT/s or whatever JEDEC rate the maker chose. Always verify if the claimed speed refers to the standard behavior or the XMP-enabled version.
B
Babyl0l
09-15-2022, 03:12 PM #5

Varies by manufacturer. By default, RAM operates at JEDEC standards, which can range widely—from 4000 to 6400 MT/s. Yet JEDEC ratings often include extra latency. For typical products labeled at 6000 MT/s, XMP must be activated to achieve better performance. Without it, speeds drop to around 4800 MT/s or whatever JEDEC rate the maker chose. Always verify if the claimed speed refers to the standard behavior or the XMP-enabled version.

C
CuzIm100ms
Member
127
09-17-2022, 11:34 AM
#6
Using that motherboard could allow you to run the Kingston Fury at 6000mt/s. However, you'll likely need to adjust the settings more frequently.
C
CuzIm100ms
09-17-2022, 11:34 AM #6

Using that motherboard could allow you to run the Kingston Fury at 6000mt/s. However, you'll likely need to adjust the settings more frequently.