Check your system status to determine if the CPU is functioning properly.
Check your system status to determine if the CPU is functioning properly.
It appears some pins are bent. I purchased a T20 Hyper Cooler Master for my Ryzen 3 2200G. When I took out the old cooler, the CPU stuck to it, so I used a plastic card to remove it. The CPU came off, but the cover stayed in place. After replacing the cooler, I had missing parts and ended up using the old one until I got the new one. Now the cooler is on the CPU, but connecting the power supply doesn’t light up the motherboard (B350M A Prime). I’m unsure if the issue is with the CPU, the motherboard, or the power supply.
The issue is that the motherboard's lights aren't powering up.
it seems you haven't noticed the bent pins much, maybe you're not paying close attention. If the post is there, it should be okay.
Are you looking for a picture using the IGPU or the discrete version? Do you have RAM installed in slots 2 and 4? Is your board running the most recent BIOS?
It had been running for about an hour when it stopped and changed the fan settings. I’m not sure what you’re asking about the “IGPU.” That’s probably a technical term you’re trying to understand, but I can help clarify if you’d like.