F5F Stay Refreshed Hardware Desktop Check your GPU fan status to see if it's malfunctioning.

Check your GPU fan status to see if it's malfunctioning.

Check your GPU fan status to see if it's malfunctioning.

Pages (2): 1 2 Next
P
151
09-26-2016, 11:12 PM
#1
I purchased this refurbished 1050 Ti in 2020. It's experiencing thermal throttling to over 80°C now. I attempted a repasting fix and cleared out the side panel to let hot air escape. Genshin runs smoothly even with throttling, but Overwatch is problematic after just ten minutes. Usually I see 110+ FPS, but it plummets to 65-75 whenever the GPU hits 80°C+. If performance is important, my system specs are: CPU i3-12100f, GPU ZOTAC 1050 Ti, 16GB 3200MHz RAM, and an Asus Prime H610M-E motherboard. Thanks for the advice!
P
PerritaMacrera
09-26-2016, 11:12 PM #1

I purchased this refurbished 1050 Ti in 2020. It's experiencing thermal throttling to over 80°C now. I attempted a repasting fix and cleared out the side panel to let hot air escape. Genshin runs smoothly even with throttling, but Overwatch is problematic after just ten minutes. Usually I see 110+ FPS, but it plummets to 65-75 whenever the GPU hits 80°C+. If performance is important, my system specs are: CPU i3-12100f, GPU ZOTAC 1050 Ti, 16GB 3200MHz RAM, and an Asus Prime H610M-E motherboard. Thanks for the advice!

T
tomtom19200
Junior Member
8
09-27-2016, 01:28 PM
#2
Do you notice real frequency reductions at 80°C? It's plausible, though if the fans are running at their rated speed it would be unlikely.
T
tomtom19200
09-27-2016, 01:28 PM #2

Do you notice real frequency reductions at 80°C? It's plausible, though if the fans are running at their rated speed it would be unlikely.

J
jrdragster
Junior Member
3
09-27-2016, 02:07 PM
#3
Sure! Would you like me to help you set up a stress test for the GPU and monitor the fan speed?
J
jrdragster
09-27-2016, 02:07 PM #3

Sure! Would you like me to help you set up a stress test for the GPU and monitor the fan speed?

S
Shadowstar957
Junior Member
49
09-29-2016, 09:37 AM
#4
I just checked the frequency during the game and saw the GPU running at about 900MHz when temperatures hit over 80°C.
S
Shadowstar957
09-29-2016, 09:37 AM #4

I just checked the frequency during the game and saw the GPU running at about 900MHz when temperatures hit over 80°C.

S
SuperBego
Junior Member
43
10-19-2016, 11:10 AM
#5
Thanks! I noticed the fan is producing an unusual humming sound during operation. I also cleaned it from dust during the last pasteurization cycle.
S
SuperBego
10-19-2016, 11:10 AM #5

Thanks! I noticed the fan is producing an unusual humming sound during operation. I also cleaned it from dust during the last pasteurization cycle.

D
DGY_DinoGamez
Member
191
10-19-2016, 11:59 PM
#6
The GPU fan speed increases quickly when under load. You can see this using MSI Afterburner before switching to Fan Control. Updated on April 12, 2024 by leclod.
D
DGY_DinoGamez
10-19-2016, 11:59 PM #6

The GPU fan speed increases quickly when under load. You can see this using MSI Afterburner before switching to Fan Control. Updated on April 12, 2024 by leclod.

H
halo_dude08
Member
183
10-20-2016, 12:56 AM
#7
Could you clarify if the issue lies with uneven tightening of the fasteners?
H
halo_dude08
10-20-2016, 12:56 AM #7

Could you clarify if the issue lies with uneven tightening of the fasteners?

P
paulkadots
Member
210
10-22-2016, 10:56 PM
#8
In the worst situation, you can simply use the basic zip method—it generally performs better that way.
P
paulkadots
10-22-2016, 10:56 PM #8

In the worst situation, you can simply use the basic zip method—it generally performs better that way.

G
GaZeVII
Member
141
10-23-2016, 05:51 AM
#9
Great choice for a beginner setup! You've got plenty of space to expand and upgrade later.
G
GaZeVII
10-23-2016, 05:51 AM #9

Great choice for a beginner setup! You've got plenty of space to expand and upgrade later.

Z
zScossa99z
Member
71
10-24-2016, 02:06 AM
#10
I turned every bolt until the tool slipped away
Z
zScossa99z
10-24-2016, 02:06 AM #10

I turned every bolt until the tool slipped away

Pages (2): 1 2 Next