Check the manual for the specific location.
Check the manual for the specific location.
These connectors are placed on the motherboard, likely near the CPU socket area. Check the Corsair H100X AIO documentation for exact locations.
The unit with three holes connects to the CPU fan header on the motherboard. The other one fits into a Corsair hub, or if a converter cable was given, it goes to a converter cable then to the motherboard ARGB header. Refer to page 7 of the manual: https://cwsmgmt.corsair.com/documents/co..._AB_WW.pdf
It's a H100x RGB Elite model inspired by the appearance of the pump housing.
Both connectors are four-pin, so you can use them together without issues.
I've reviewed the content you shared. Let me know if you'd like me to clarify or adjust anything.
Additionally, if you need to review pages 1 through 8 of the referenced guide, here’s the link: https://dlcdnets.asus.com/pub/ASUS/mb/Socket AM5/ROG STRIX B650-A GAMING WIFI/E20268_ROG_STRIX_B650-A_GAMING_WIFI_UM_WEB.pdf?model=ROG STRIX B650-A GAMING WIFI
The motherboard has four pins for the CPU fan header, while the AIO cooler uses three pins on its cable.