F5F Stay Refreshed Hardware Desktop Check if the NVMe device is recognized by the system and verify its status in BIOS or Windows settings.

Check if the NVMe device is recognized by the system and verify its status in BIOS or Windows settings.

Check if the NVMe device is recognized by the system and verify its status in BIOS or Windows settings.

Pages (2): 1 2 Next
W
wedcake
Junior Member
35
11-21-2021, 06:22 PM
#1
You recently purchased a M.2 NVMe drive and aren't seeing it recognized in your BIOS. You experienced the same problem with another NVMe card you removed from a pre-built system. Both use PCIe 3.0, so you might need to adjust settings in your motherboard's BIOS. Your Aorus Z590 Ultra board is compatible—just check the manufacturer's guidelines for updating or modifying BIOS settings. Let me know if you need more details!
W
wedcake
11-21-2021, 06:22 PM #1

You recently purchased a M.2 NVMe drive and aren't seeing it recognized in your BIOS. You experienced the same problem with another NVMe card you removed from a pre-built system. Both use PCIe 3.0, so you might need to adjust settings in your motherboard's BIOS. Your Aorus Z590 Ultra board is compatible—just check the manufacturer's guidelines for updating or modifying BIOS settings. Let me know if you need more details!

G
guntaj800
Member
112
11-27-2021, 08:47 PM
#2
It seems the BIOS might be configured for legacy instead of UEFI. Verify that setting could cause Windows to run in UEFI mode, as your motherboard might be set accordingly. Please confirm.
G
guntaj800
11-27-2021, 08:47 PM #2

It seems the BIOS might be configured for legacy instead of UEFI. Verify that setting could cause Windows to run in UEFI mode, as your motherboard might be set accordingly. Please confirm.

D
Dr_Fred
Member
206
12-01-2021, 02:27 AM
#3
i mean theres a very good chance i jsut have no idea how to check that
D
Dr_Fred
12-01-2021, 02:27 AM #3

i mean theres a very good chance i jsut have no idea how to check that

H
httpsbaby
Member
61
12-01-2021, 06:12 AM
#4
Just verified its UEFI settings.
H
httpsbaby
12-01-2021, 06:12 AM #4

Just verified its UEFI settings.

S
Skylaire
Member
104
12-04-2021, 10:45 AM
#5
Sorry, I don’t have access to that information.
S
Skylaire
12-04-2021, 10:45 AM #5

Sorry, I don’t have access to that information.

R
ReaperCreepR
Member
114
12-05-2021, 12:06 AM
#6
It seems unclear about the setup. You mentioned pulling it out, but I’ll assume it’s correctly installed. If you’re unsure, I could try the opposite Windows version—Legacy BIOS or UEFI. Otherwise, it might just be a faulty drive, though recent success makes that less likely.
R
ReaperCreepR
12-05-2021, 12:06 AM #6

It seems unclear about the setup. You mentioned pulling it out, but I’ll assume it’s correctly installed. If you’re unsure, I could try the opposite Windows version—Legacy BIOS or UEFI. Otherwise, it might just be a faulty drive, though recent success makes that less likely.

D
Dil8
Junior Member
46
12-06-2021, 12:12 AM
#7
A piece was removed from an older setup and another is brand new.
D
Dil8
12-06-2021, 12:12 AM #7

A piece was removed from an older setup and another is brand new.

I
ImJustJoshin
Member
65
12-06-2021, 12:48 AM
#8
What processor are you running? Have you placed the M.2 device in the upper M.2 port?
I
ImJustJoshin
12-06-2021, 12:48 AM #8

What processor are you running? Have you placed the M.2 device in the upper M.2 port?

F
Ferdik04_CZ
Junior Member
11
12-10-2021, 11:20 AM
#9
Yes, it fits in the top position.
F
Ferdik04_CZ
12-10-2021, 11:20 AM #9

Yes, it fits in the top position.

B
Bombartia
Senior Member
430
12-12-2021, 08:19 AM
#10
On 500 series boards the highest slot is turned off because it's set up for PCIe only and connected directly to the CPU, making it impossible to change settings. A 11th generation processor would be needed to work with it.
B
Bombartia
12-12-2021, 08:19 AM #10

On 500 series boards the highest slot is turned off because it's set up for PCIe only and connected directly to the CPU, making it impossible to change settings. A 11th generation processor would be needed to work with it.

Pages (2): 1 2 Next