F5F Stay Refreshed Hardware Desktop Can't reach BIOS, system starts normally to OS

Can't reach BIOS, system starts normally to OS

Can't reach BIOS, system starts normally to OS

O
OsamaBinAldi
Junior Member
14
03-29-2020, 02:57 AM
#1
Opening BIOS via Windows (verification needed in recent updates): Go to Settings. Access it by clicking the gear icon on the Start screen. Choose Update & Security, then Recovery from the menu. Select Restart Now under Advanced startup. ... Proceed to Troubleshoot, then Advanced options. Pick UEFI Firmware Settings. ... Initiate Restart. Typically you enter BIOS by pressing DEL or F2—try holding the key during boot? A PS/2 keyboard can help, as it connects directly to the IO chip rather than through USB controllers...
O
OsamaBinAldi
03-29-2020, 02:57 AM #1

Opening BIOS via Windows (verification needed in recent updates): Go to Settings. Access it by clicking the gear icon on the Start screen. Choose Update & Security, then Recovery from the menu. Select Restart Now under Advanced startup. ... Proceed to Troubleshoot, then Advanced options. Pick UEFI Firmware Settings. ... Initiate Restart. Typically you enter BIOS by pressing DEL or F2—try holding the key during boot? A PS/2 keyboard can help, as it connects directly to the IO chip rather than through USB controllers...

_
_TrapBoy_
Member
224
03-30-2020, 10:38 PM
#2
The issue seems resolved, but I encountered AA after turning on the PC. It displayed 02 and then a black screen. After restarting, the BIOS wasn't visible and the screen didn’t prompt for deletion. The file mentioned was 20210517_150810.mp4.
_
_TrapBoy_
03-30-2020, 10:38 PM #2

The issue seems resolved, but I encountered AA after turning on the PC. It displayed 02 and then a black screen. After restarting, the BIOS wasn't visible and the screen didn’t prompt for deletion. The file mentioned was 20210517_150810.mp4.

D
DJ_PvPz
Member
184
03-31-2020, 06:56 AM
#3
ram isn't set up correctly. There should be an empty space between them. Ideally, the farthest slot from the CPU should be filled first, then the one to the left with one slot remaining. So if the closest slot is number 1, put the memory in slots 2 and 4.
D
DJ_PvPz
03-31-2020, 06:56 AM #3

ram isn't set up correctly. There should be an empty space between them. Ideally, the farthest slot from the CPU should be filled first, then the one to the left with one slot remaining. So if the closest slot is number 1, put the memory in slots 2 and 4.

B
70
04-21-2020, 08:03 AM
#4
Do you connect your monitor via DisplayPort? Certain motherboards may not set it up properly, preventing the BIOS from showing a splash screen.
B
Best_Skywalker
04-21-2020, 08:03 AM #4

Do you connect your monitor via DisplayPort? Certain motherboards may not set it up properly, preventing the BIOS from showing a splash screen.

W
Waverabbit
Senior Member
643
04-21-2020, 09:57 AM
#5
W
Waverabbit
04-21-2020, 09:57 AM #5

J
Juan2610
Posting Freak
875
04-21-2020, 04:09 PM
#6
No HDMI on the main display and a DisplayPort on the side, so assume it will choose one.
J
Juan2610
04-21-2020, 04:09 PM #6

No HDMI on the main display and a DisplayPort on the side, so assume it will choose one.

E
ElaticsGone
Member
196
04-23-2020, 01:32 PM
#7
regrettably nothing altered, I didn't expect it since it was set up that way before. It's a bit frustrating now that after resetting the BIOS by taking out the battery, my RAM dropped to 2133MHz.
E
ElaticsGone
04-23-2020, 01:32 PM #7

regrettably nothing altered, I didn't expect it since it was set up that way before. It's a bit frustrating now that after resetting the BIOS by taking out the battery, my RAM dropped to 2133MHz.