Cable in the basement
Cable in the basement
Hello, I’m exploring setting up a small home recording studio in the attic. Unfortunately, there’s no Ethernet port there. While running a cable is straightforward, I’m unsure if my current router—still from my ISP—can handle it. If not, what alternatives should I consider? Thanks ahead!
I've tried mesh and it worked well for me. It's better than powerline edit when I misread the options.
You might check the router's ports using a device to confirm functionality, as about 90% of the time, having available ports should suffice.
Check your router for available Ethernet ports. Since you're using the Experia V10, ensure it supports the necessary ports and consider upgrading if needed. You may need a compatible Ethernet cable or adapter.
cable would likely be the most affordable choice—just verify if your router or switch includes additional LAN ports to extend your Wi-Fi range. If fast speed or low latency isn’t critical, and you dislike cables, a mesh network could work well; it usually needs a LAN port anyway. For simplicity, opt for a standard LAN cable if one is available.
Suggest using an affordable (Gigabit) hub priced near 30EUR on Amazon. Disconnect one of the existing devices from the router, connect a cable from the hub to the router, insert the unplugged device into the hub, and then attach your new cable to the hub.
It's clear you're looking for a simple Ethernet solution. A powerbar for Ethernet is essentially what it sounds like. I've used one from Amazon.de and it functions well. Any hub will work too, just ensure it supports Gigabit speeds—especially if your plan exceeds 100 megabits per second.