BiosMsi Z370 Krait security lockout

purplepplEater
Junior Member

12-23-2017, 06:25 PM

I experimented with different configurations. Fast boot worked smoothly without problems. Using an M.2 drive was successful. After changing it to "Msi Fast Boot," the system failed to detect any boot or input device. I understand a BIOS reset could help, but it’s challenging due to my conditions. Anyone else have suggestions?

purplepplEater

12-23-2017, 06:25 PM #1

xFilbert_
Member

191

12-23-2017, 07:53 PM

Open the bios settings and clear every setting. Navigate to the final few tabs. Refer to the second and third entries...

xFilbert_

12-23-2017, 07:53 PM #2

Open the bios settings and clear every setting. Navigate to the final few tabs. Refer to the second and third entries...

GlalieGamer
Junior Member

12-25-2017, 11:01 PM

Ensure your CMOS is reset if you can't access your BIOS.

GlalieGamer

12-25-2017, 11:01 PM #3

Ensure your CMOS is reset if you can't access your BIOS.

benjfifi
Junior Member

12-30-2017, 08:05 AM

Avoided accessing BIOS, just couldn’t locate the drives. Had to check the MSI board manual, page 41. https://www.msi.com/Motherboard/support/...own-manual

benjfifi

12-30-2017, 08:05 AM #4

Avoided accessing BIOS, just couldn’t locate the drives. Had to check the MSI board manual, page 41. https://www.msi.com/Motherboard/support/...own-manual

FinnBoZz
Member

01-02-2018, 02:32 AM

Gothcya, what’s on your mind?

FinnBoZz

01-02-2018, 02:32 AM #5

Gothcya, what’s on your mind?

NayZayRay
Member

189

01-09-2018, 12:21 PM

This setup ensures your inputs aren't overlooked. I confirmed the details beforehand. That's why I'm here. No external devices like keyboards or mice are detected or powered during this mode. Port changes don't affect it. Updated February 29, 2020 by Dee Dos – Info revised

NayZayRay

01-09-2018, 12:21 PM #6

jick3r
Junior Member

01-09-2018, 07:47 PM

I noticed you have certain limitations that complicate CMOS resets. You can use a switch from an old case to connect to the CMOS pins and simplify things. For now, the JM21 model works best—just reach into the CMOS jumpers.

jick3r

01-09-2018, 07:47 PM #7

hammer_040
Junior Member

01-09-2018, 08:59 PM

Thanks for the feedback. I’ll look for a CMOS reset that might be left in the package. MSI tends to add one when they include mobos.

hammer_040

01-09-2018, 08:59 PM #8

Thanks for the feedback. I’ll look for a CMOS reset that might be left in the package. MSI tends to add one when they include mobos.