F5F Stay Refreshed Hardware Desktop ASUS Strix B450-I model 5950X experiences throttling issues.

ASUS Strix B450-I model 5950X experiences throttling issues.

ASUS Strix B450-I model 5950X experiences throttling issues.

Z
zeroxpalace
Member
116
01-25-2020, 09:05 AM
#1
After several attempts to diagnose the problem, I'm seeking guidance. Recently switching from a 3900XT to a 5950x on my NZXT H1 Streaming/Server PC, I'm facing thermal challenges. The 5950X was throttling significantly, leading to various complications. Over the past week, I've experimented with several solutions: removed all panels, swapped the Noctua NH-L12S CPU cooler for an ARCTIC Liquid Freezer III 240 (now outside with back panel off), added extra Noctua NF-A12x25 and NF-A4x20 fans to improve airflow, and limited my PPT to 150W. This reduced the CPU temps to under 82°C, lowering boosts from 4.7GHz to around 4.3GHz. However, throttling still occurs after short runs, even though it's not summer yet. The EDC remains stuck at about 60% of my 160A limit until it starts throttling, then jumps back up to 100%. Is this typical behavior for the ASUS Strix B450-I board, or should I try further adjustments?
Z
zeroxpalace
01-25-2020, 09:05 AM #1

After several attempts to diagnose the problem, I'm seeking guidance. Recently switching from a 3900XT to a 5950x on my NZXT H1 Streaming/Server PC, I'm facing thermal challenges. The 5950X was throttling significantly, leading to various complications. Over the past week, I've experimented with several solutions: removed all panels, swapped the Noctua NH-L12S CPU cooler for an ARCTIC Liquid Freezer III 240 (now outside with back panel off), added extra Noctua NF-A12x25 and NF-A4x20 fans to improve airflow, and limited my PPT to 150W. This reduced the CPU temps to under 82°C, lowering boosts from 4.7GHz to around 4.3GHz. However, throttling still occurs after short runs, even though it's not summer yet. The EDC remains stuck at about 60% of my 160A limit until it starts throttling, then jumps back up to 100%. Is this typical behavior for the ASUS Strix B450-I board, or should I try further adjustments?

F
FusionFria
Junior Member
39
01-30-2020, 02:48 AM
#2
Checked the presentation; it appears the default is around 140-150 slides.
F
FusionFria
01-30-2020, 02:48 AM #2

Checked the presentation; it appears the default is around 140-150 slides.

R
64
01-30-2020, 09:00 AM
#3
I adjusted it based on some tutorials, but noticed it hit maximum temperatures or spiked too high, so I reset it to standard values. TDC and EDC were initially at 140 and 160 after reviewing many forums, yet they rarely exceeded 60-70% of those numbers except during throttling when EDC reached its limit.
R
RorroFuture420
01-30-2020, 09:00 AM #3

I adjusted it based on some tutorials, but noticed it hit maximum temperatures or spiked too high, so I reset it to standard values. TDC and EDC were initially at 140 and 160 after reviewing many forums, yet they rarely exceeded 60-70% of those numbers except during throttling when EDC reached its limit.