Are there any issues with the voltage or another concern?

F5F Stay Refreshed Hardware Desktop Are there any issues with the voltage or another concern?

Are there any issues with the voltage or another concern?

Are there any issues with the voltage or another concern?

Pages (3): Previous 1 2 3 Next

F

Foreignpear
Junior Member

30

01-21-2023, 07:36 AM

#11

Standard BIOS settings for the CPU are reliable, but your BIOS could be old if you're seeing excessive heat. Updating your BIOS might help achieve a more modern configuration.

F

Foreignpear

01-21-2023, 07:36 AM #11

Standard BIOS settings for the CPU are reliable, but your BIOS could be old if you're seeing excessive heat. Updating your BIOS might help achieve a more modern configuration.

F

Fiery__Phoenix
Junior Member

13

01-30-2023, 04:58 AM

#12

The connection was poor, as expected.

F

Fiery__Phoenix

01-30-2023, 04:58 AM #12

The connection was poor, as expected.

N

nep24
Member

224

01-30-2023, 08:07 AM

#13

The BIOS has reached its latest stable release, but the adjustments within it remain at their standard defaults.

N

nep24

01-30-2023, 08:07 AM #13

The BIOS has reached its latest stable release, but the adjustments within it remain at their standard defaults.

P

Pastos
Junior Member

5

01-30-2023, 09:49 AM

#14

Standard BIOS settings are usually fine to retain. Temperatures when idle shouldn't exceed the 60s range; this could mean the BIOS is altered or the cooler isn't properly secured.

P

Pastos

01-30-2023, 09:49 AM #14

Standard BIOS settings are usually fine to retain. Temperatures when idle shouldn't exceed the 60s range; this could mean the BIOS is altered or the cooler isn't properly secured.

T

TrueBit
Senior Member

590

01-31-2023, 02:45 AM

#15

Some Asus boards may behave differently. The voltage should stay around 1.5v or higher. There’s an overvolting problem reported with these boards. @ElectricityGoBZT reviewed your BIOS and found no SVID behavior feature. In advanced mode, adjust the core voltage to 1.30v manually, restart Windows, and verify the readings. On this unit, the Asus Performance Enhancement setting might be contributing to the issue—consider turning it off temporarily. Also check the AI Tweaker settings.

T

TrueBit

01-31-2023, 02:45 AM #15

Some Asus boards may behave differently. The voltage should stay around 1.5v or higher. There’s an overvolting problem reported with these boards. @ElectricityGoBZT reviewed your BIOS and found no SVID behavior feature. In advanced mode, adjust the core voltage to 1.30v manually, restart Windows, and verify the readings. On this unit, the Asus Performance Enhancement setting might be contributing to the issue—consider turning it off temporarily. Also check the AI Tweaker settings.

N

Nikos3434
Member

133

01-31-2023, 07:45 PM

#16

Disabling Asus Performance Enhancement causes all cores to run at 5287MHz idle, regardless of programs or internet usage, and this behavior remains consistent even when HWiNFO or armoury crate are active. To achieve a stable setting, consider adjusting the VRM core voltage manually to 1.3.

N

Nikos3434

01-31-2023, 07:45 PM #16

Disabling Asus Performance Enhancement causes all cores to run at 5287MHz idle, regardless of programs or internet usage, and this behavior remains consistent even when HWiNFO or armoury crate are active. To achieve a stable setting, consider adjusting the VRM core voltage manually to 1.3.

L

LikeABawzz
Junior Member

49

02-02-2023, 07:02 PM

#17

I'm preparing to verify the information and request specific boards affected by this concern. The only known Asus board issue relates to AMD SoC voltage, so I'll address that point.

Normal transients can drop to 1.5 volts, while typical operation should maintain around 1.3-1.4 volts. If the system overheats, it may indicate a more serious problem.

L

LikeABawzz

02-02-2023, 07:02 PM #17

I'm preparing to verify the information and request specific boards affected by this concern. The only known Asus board issue relates to AMD SoC voltage, so I'll address that point.

Normal transients can drop to 1.5 volts, while typical operation should maintain around 1.3-1.4 volts. If the system overheats, it may indicate a more serious problem.

L

Lord_Foxtrot
Senior Member

408

02-04-2023, 06:37 PM

#18

Changed settings to BIOS default, verified cooler installation, removed plastic from the cooler. Follow these steps carefully. Any issues during this process are covered by warranty. If you handle voltages and damage your chip, you won’t be covered.

L

Lord_Foxtrot

02-04-2023, 06:37 PM #18

Changed settings to BIOS default, verified cooler installation, removed plastic from the cooler. Follow these steps carefully. Any issues during this process are covered by warranty. If you handle voltages and damage your chip, you won’t be covered.

T

TheRealShrub
Senior Member

409

02-10-2023, 11:40 PM

#19

It's not just a guess. Check all discussions about overheating in 13th gen Asus boards and chips drawing near to 1.5vcore—this hasn't been a normal operating range since manufacturing began around 28nm. Definitely not the expected behavior for the chip at standard settings. The best CPU-Z benchmark run was achieved with a 13700 at 1.53v: https://wccftech.com/intel-core-i7-13700...cpu-z/amp/

T

TheRealShrub

02-10-2023, 11:40 PM #19

It's not just a guess. Check all discussions about overheating in 13th gen Asus boards and chips drawing near to 1.5vcore—this hasn't been a normal operating range since manufacturing began around 28nm. Definitely not the expected behavior for the chip at standard settings. The best CPU-Z benchmark run was achieved with a 13700 at 1.53v: https://wccftech.com/intel-core-i7-13700...cpu-z/amp/

_

_Piotre_
Junior Member

11

02-11-2023, 02:54 AM

#20

I checked some articles and confirmed that manually adjusting the OC can be safe around 1.3. Your article doesn’t appear to be specific to Asus, but the measurements seem to vary based on the software used.

_

_Piotre_

02-11-2023, 02:54 AM #20

I checked some articles and confirmed that manually adjusting the OC can be safe around 1.3. Your article doesn’t appear to be specific to Asus, but the measurements seem to vary based on the software used.

Pages (3): Previous 1 2 3 Next