All ROG build problems – need assistance!
All ROG build problems – need assistance!
My problem isn't about powering up the PC, but about installing my motherboard. A few years ago, I chose an all-ROG build (thanks, Linus). I began with a Phanteks case for my Asus ROG Z390E Wi-Fi board and upgraded to an Asus ROG Strix Helios. Later, I switched to an Asus ROG Strix Z690-E, which fit perfectly. Recently, I upgraded again—CPU, AIO, RAM—and bought an Asus ROG Maximus Z890 Hero. When trying to install it, the screw holes didn’t align. I read on forums about using taller standoffs, but someone said it would work fine otherwise. They mentioned a metal shield behind the board could shift alignment. I searched for spare parts and thought I might have misplaced some screws. It turns out I’m missing certain motherboard screws (only six of nine). I contacted Asus hoping they could provide taller standoffs or replacements, but they told me my case isn’t compatible with the board. They clarified that the motherboard is ATX-sized and my chassis only fits boards up to 12"x10.9", emphasizing the hole placement matters. It seemed odd that Asus wouldn’t offer different chassis/motherboards for compatibility. I’m not a pro, just starting out, so this was confusing. Do you know what they meant? If they’re right, should I look for taller standoffs or extensions? Any advice would be appreciated. If you have photos or details, I can share them. Until then, I thought my explanation should help others.
To fit an E-ATX into an ATX case, you might need to drill and use either M3 bolt+nut setup or M3 rivet nuts (nutserts) sized 4.7-5mm. Insert standard brass standoffs into them. Be sure to clean up any metal shavings. If you're not comfortable doing this yourself, consider a new case or another motherboard option.
Are you implying that the final row of holes on your motherboard won’t connect to the last row of stand-off slots in your case? A case designed for a 12x10.9" motherboard will accommodate one of those sizes and smaller. Your motherboard should fit within the case since it doesn’t exceed the recommended dimensions of 12x10.9". The board features a total of nine screw holes, but you can only fasten six of them. When securing the board, use the edge of the panel for support while connecting cables.
I attempted this myself. I worried about improper fitting leading to a short circuit since the board wouldn’t power on. It seems either that or my ASUS ROG Thor Platinum II stopped working. That initial problem sparked the whole situation, though I hadn’t mentioned it until now. My main concern was that the motherboard was getting power—screen works, RAM lights up, AIO functions—but nothing else. Fans won’t spin, and the PC itself doesn’t respond. The power button stays on, but that’s all. I don’t have a PSU tester and lack the expertise to try the paper clip trick.
The board is currently in place. The CPU model is not specified.
I removed it and decided to test it separately to see how it would start. This is my first time doing that, so I’m trying to separate the wires and connect them properly. Should I take out the power supply from the case before plugging everything back in, or is it okay if it stays in place?
You can place the PSU inside the chassis as long as the cables connect to the motherboard. Simply connect the PSU to the motherboard and skip the rest; run the board using its built-in graphics and see if it boots. The existing board includes a power button on the case for easy startup.