F5F Stay Refreshed Hardware Desktop Adjusting CPU fan settings for optimal performance

Adjusting CPU fan settings for optimal performance

Adjusting CPU fan settings for optimal performance

S
SoyDash
Posting Freak
859
08-21-2023, 05:31 PM
#1
S
SoyDash
08-21-2023, 05:31 PM #1

P
Pablodogs
Member
53
08-22-2023, 02:23 AM
#2
If it fits in your case, then yeah its fine. You can also just use 1 fan depending on the CPU you have in that slot. Maybe even put the fan on the other side if you have the clearance.
P
Pablodogs
08-22-2023, 02:23 AM #2

If it fits in your case, then yeah its fine. You can also just use 1 fan depending on the CPU you have in that slot. Maybe even put the fan on the other side if you have the clearance.

M
Marcustheduke
Senior Member
679
08-22-2023, 09:23 AM
#3
It seems he’ll face the same clearance problem on the other side because of the MSI shroud heatsink. I’d recommend using a Noctua ippc fan and swapping both with one Noctua NF-F12 iPPC 3000 PWM, Heavy Duty Cooling Fan (4-Pin, 3000 RPM, 120mm, Black) for a desktop setup.
M
Marcustheduke
08-22-2023, 09:23 AM #3

It seems he’ll face the same clearance problem on the other side because of the MSI shroud heatsink. I’d recommend using a Noctua ippc fan and swapping both with one Noctua NF-F12 iPPC 3000 PWM, Heavy Duty Cooling Fan (4-Pin, 3000 RPM, 120mm, Black) for a desktop setup.

T
TGMGAMER431
Junior Member
14
08-22-2023, 09:50 AM
#4
It's fine. If the fans aren't sufficient or too noisy, switch to NF A12x25 or BQ SW4. These won't work with Noctuas IPPC; they run at 3000rpm with extremely loud sound (I own an old one).
T
TGMGAMER431
08-22-2023, 09:50 AM #4

It's fine. If the fans aren't sufficient or too noisy, switch to NF A12x25 or BQ SW4. These won't work with Noctuas IPPC; they run at 3000rpm with extremely loud sound (I own an old one).

B
Belthazard
Junior Member
13
09-09-2023, 08:14 PM
#5
I would consider this only if absolutely needed. It seems unlikely to require more than one fan, unless the processor is very powerful.
B
Belthazard
09-09-2023, 08:14 PM #5

I would consider this only if absolutely needed. It seems unlikely to require more than one fan, unless the processor is very powerful.

J
jamesydog
Member
193
09-16-2023, 11:54 AM
#6
You can place the Phanteks T30 fan centrally. It will apply a firm pressure. This 120mm model offers great balance between noise reduction and performance. Positioning it in the middle delivers similar results to having two units side by side. Just ensure it fits within the case when installing.
J
jamesydog
09-16-2023, 11:54 AM #6

You can place the Phanteks T30 fan centrally. It will apply a firm pressure. This 120mm model offers great balance between noise reduction and performance. Positioning it in the middle delivers similar results to having two units side by side. Just ensure it fits within the case when installing.