Achieving 1.49 vcore on the X570 Aorus Master with default configurations
Achieving 1.49 vcore on the X570 Aorus Master with default configurations
You're seeing normal performance readings from your CPU and motherboard. The slight discrepancy between BIOS settings and monitoring tools usually comes from software or driver behavior. Disabling certain settings in BIOS might help, but it's not necessary unless you're experiencing instability. The extra voltage you notice could be due to thermal throttling or driver optimizations. Keep an eye on temperatures and performance trends.
I think it's typical when the system isn't under pressure. However, after running a stress test on that chip, I believe the vcore should settle to the expected value according to the BIOS. Since I don’t have direct experience, I’m curious what others have observed.
even in that scenario with OCCT which is a 100% load using AVX2 I'm still seeing 1.3-1.35v which is significantly higher than the 1.2v specified in the bios. This is just very out of the ordinary from what I'm used to on team blue. I'd love to know if this is normal, or potentially a bug with the F30 bios?
The BIOS is configured for 1.2v, while in Windows the CPU typically operates between 1.43 and 1.45v
It's typical when the system isn't under a strong multi-core workload. Idle and single-core performance tends to rise significantly compared to all cores, which is normal. Don't stress about it.
Yes, that's typical. The vcore usually runs a bit higher—around .1 to .15 volts—when the system is fully loaded.