F5F Stay Refreshed Hardware Desktop 4GHz clock speed works well with the Ryzen 7 2700.

4GHz clock speed works well with the Ryzen 7 2700.

4GHz clock speed works well with the Ryzen 7 2700.

I
IAmKillerham
Senior Member
252
07-20-2018, 04:25 PM
#1
I attempted to reach 4GHz at 1.3V but the system crashed. It's unclear if the issue was a faulty component or my configuration. The temperatures stayed under 60°C during overclocking. MOBO: Gigabyte x470 Ultra Gaming PSU: EVGA 1000w
I
IAmKillerham
07-20-2018, 04:25 PM #1

I attempted to reach 4GHz at 1.3V but the system crashed. It's unclear if the issue was a faulty component or my configuration. The temperatures stayed under 60°C during overclocking. MOBO: Gigabyte x470 Ultra Gaming PSU: EVGA 1000w

S
Sertero28
Senior Member
589
07-20-2018, 11:43 PM
#2
The voltage seems a bit too low for 4.0 GHz based on my 1700X specs.
S
Sertero28
07-20-2018, 11:43 PM #2

The voltage seems a bit too low for 4.0 GHz based on my 1700X specs.

R
Ryanmon
Member
200
07-21-2018, 04:15 AM
#3
A suitable voltage to test would depend on the specific setup, but generally starting around 12 volts is a common range for many circuits.
R
Ryanmon
07-21-2018, 04:15 AM #3

A suitable voltage to test would depend on the specific setup, but generally starting around 12 volts is a common range for many circuits.

Y
ylyes4
Senior Member
572
07-21-2018, 05:01 AM
#4
Observe the chip voltages. Analyze performance at 4.0 GHz turbo; my 1700X registers 1.55 V at 3.9 GHz, suggesting similar values around +200 MHz on Zen+, around 4.1 GHz. Adjust voltage until it stabilizes. I typically run P95 for stress tests. (Basic FFTs for core, extensive for memory/fabric)
Y
ylyes4
07-21-2018, 05:01 AM #4

Observe the chip voltages. Analyze performance at 4.0 GHz turbo; my 1700X registers 1.55 V at 3.9 GHz, suggesting similar values around +200 MHz on Zen+, around 4.1 GHz. Adjust voltage until it stabilizes. I typically run P95 for stress tests. (Basic FFTs for core, extensive for memory/fabric)

S
SiphonicVirus
Member
201
07-21-2018, 10:33 AM
#5
Requires 1.4v at 4.2ghz on R7 1700. Slight adjustments: 1.393v at 4.1ghz, 1.375v at 4.0ghz (golden sample available)
S
SiphonicVirus
07-21-2018, 10:33 AM #5

Requires 1.4v at 4.2ghz on R7 1700. Slight adjustments: 1.393v at 4.1ghz, 1.375v at 4.0ghz (golden sample available)

R
RidleyLM
Junior Member
4
07-23-2018, 09:27 AM
#6
You'd likely need to supply voltage specifically to the dynamic VCore, not just the VCore.
R
RidleyLM
07-23-2018, 09:27 AM #6

You'd likely need to supply voltage specifically to the dynamic VCore, not just the VCore.

L
lurado04
Member
106
07-24-2018, 02:19 AM
#7
Your setup is working well at 1.35v with a stable OC3.9GHz!
L
lurado04
07-24-2018, 02:19 AM #7

Your setup is working well at 1.35v with a stable OC3.9GHz!