Z690 chipset temps
Z690 chipset temps
Hello everyone. My ASUS ROG z690-i board has been causing quite a few issues lately. While it’s been mostly troublesome, I’m getting close to finding a solution. Right now, when idle (like web browsing), the chipset temps often exceed 70°C, sometimes reaching up to 80. During gaming or heavy tasks, they climb into the high 90s, and moving the M.2 SSD caused overheating, leading to USB speed drops. To sum it up: idle temps are 72-80°C, load temps around 80-100°C. I read another user with the same board had a similar problem and they managed to get ASUS to return the unit. Also, I can’t install the second M.2 slot because both the SSD and chipset would overheat. I’ve heard it’s not unusual for the z690 chipset to run hot, but I’m not sure if those temps are safe. According to what I know, the chipset maxes out around 108°C, and I’ve seen it hit that mark during gaming sessions with the SSD on slot 2—after about 45 minutes, it could reach as high as 110°C. Even after moving the drive, I’m still near the thermal limit. My main concerns are: is this okay? Could these temperatures cause the board to fail permanently? Are these temps typical for the z690 chipset? Lastly, should I consider returning the board for this issue?
They seem extremely unsafe. It’s likely they’re designed for temperatures up to 110°C, but I can’t confirm without inspecting the components. Regardless, there’s clearly an issue. I wouldn’t use this board again until you process a return and provide a replacement.
That certainly doesn't seem right to me. I've got a Z690I Aorus Ultra and after playing Insurgency for about an hour and a half? and now sitting around doing not a lot, the PCH is at a comparatively frosty 47C with both of the M.2's in the sandwich occupied. Granted I do have some airflow over the stack, but by the time it gets down to the bottom M.2 slot and the PCH the radiator fans above it don't do a whole hell of a lot of good since they're sucking air over it. Time to bitch at ASUS and see if you can get something figured out.
Good to know. Time to dismantle the ol SFFPC ig. It didn't even make it to 6 months lmfao Was planning on it if the info I got from this thread reflected would I was thinking. Obviously it'll take down my PC but could always get replacement parts in the meantime. That's more or less what I was looking to hear, thanks. I actually had the Z690i Aorus DDR4 before this board, but couldn't get it to boot. As mentioned in original post I've heard of a lot of people having high(er) chipset temps (even on ATX boards), so hearing that you get some rather cozy temps (comparatively) on an itx board makes me think there's DEFINITELY something wrong. I know my mobo is itx, and my case doesn't have THE BEST airflow. But man hitting near 100 C on load just seems like something is wrong LMAO I was kinda looking to switch form factors anyways (the sff ITX pc isn't working out as well as I thought, and needs changed), and maybe even platforms if it were to work out. As stated above PC would be down without a motherboard so either laptop bound or something else shows up. Also, thank you both for the quick and informative replies
It's normal for chipsets to get a bit warm, but 100°C is too high. A laptop shouldn't exceed its safe temperature range. As long as you have a good machine, it's fine. I lost a laptop at the end of 2022 and it was really uncomfortable to use. I prefer having my system in a full-size ATX setup in a mid-tower case—it gives me more space and control. I don't like dealing with tight cases or cramped workspaces. I've also worked on older iMacs, which were even more restrictive. I want a comfortable setup.
I own a solid laptop, but I'm uncertain about sticking with that experience. I'm relocating soon for university, which is why I built a smaller PC. I might still want a compact system, though I don't feel the need to go full ATX. I don't like the style of many budget cases, and honestly I don't require an ATX size. Checking local availability would suggest moving to an mATX unit instead. It should fit enough space for a couple drives and a large tower cooler or GPU, while still being desk-friendly. Also, getting a decent motherboard (like z-series) for my existing case is nearly as cost-effective as buying an mATX with a Ryzen 7600+ board.
There are around 45 mines on the Msi board. Would you like me to add a fan for now? It might help if it’s placed to the right of the GPU under a heat shield or sync area.
Sure, I can adjust that. Let me add an additional fan to the setup.