You're trying to boost your RAM speed, but your attempts haven't worked. Need some guidance?
You're trying to boost your RAM speed, but your attempts haven't worked. Need some guidance?
Here are your details rephrased:
First off, the system specs are as follows: a Ryzen 5 2600 processor (not overclocked), an MSI B450-M Pro-VDH MAX T-Force DELTA TUF Gaming Alliance RGB DDR4 with 2x8GB RAM, Super Flower LEADEX III Gold 550W. I opted for this RAM because it supports up to 3200MHz. The main challenge is achieving the desired frequency. I've attempted the A-XMP profiles in my BIOS, but the first preset intended to push the RAM to 2933MHz failed during stress tests and triggered an IRQL_NOT_LESS_OR_EQUAL error. The second preset meant for 3200MHz also didn't work. I've tried the Memory TryIt feature, though it seems ineffective. Advice suggests using a DRAM calculator and Thaiphoon, but I'm unsure how to apply the timing details. Also, instructions mention using MemTest, but I don’t have a flash drive handy or can wait for one. I’m feeling quite confused about next steps. Thanks for any help!
They’re designed for specific performance levels, not maximum claims. Their ratings apply to slots 2 and 4 only.
Not too far away. Also, do you really need your dual channel RAM in slots 2 and 4? I have mine in slots 1 and 3. Plus, could you clarify what you mean by "rate" — are you asking about voltage?
They need specific requirements. I have 3000 rated RAM but it only runs at 2933.
It is rated at a specific frequency like the advertised speeds. If XMP isn't working, try placing them in slots 2 and 4. If that doesn't resolve the issue, set the SOC to 1.15 and DRAM to 1.35, then proceed with 2933 with XMP enabled. Once stability is confirmed, move to 3200.
Thanks for the support! You adjusted your RAM slots to 2 and 4 and used the A-XMP setting, and it’s functioning well. I wasn’t sure how crucial RAM placement was. I’m hoping this setup remains stable and won’t cause any issues.