F5F Stay Refreshed Hardware Desktop You're looking for guidance on verifying your build.

You're looking for guidance on verifying your build.

You're looking for guidance on verifying your build.

M
Moon_Claw
Member
Find
99
06-02-2023, 12:02 PM
#1
Hi everyone,
I have these two builds and I'm facing a challenge.
I want to place the 4060 Ti in the second PCIe slot and the Magewell capture card in the third.
However, the height is 41mm, but the third card is two PCIe slots apart (40mm).
Will that cause a problem fitting it?
I'm not worried about heat since the 4060 Ti will just act as an output card for Resolve and won't perform any calculations.
Reply
Reply
M
Moon_Claw
06-02-2023, 12:02 PM #1

Hi everyone,
I have these two builds and I'm facing a challenge.
I want to place the 4060 Ti in the second PCIe slot and the Magewell capture card in the third.
However, the height is 41mm, but the third card is two PCIe slots apart (40mm).
Will that cause a problem fitting it?
I'm not worried about heat since the 4060 Ti will just act as an output card for Resolve and won't perform any calculations.

Reply
Reply
K
KerimPlays
Junior Member
Find
40
06-02-2023, 07:11 PM
#2
I believe adding more than just dual-slot cards in an X670E-Creator will be challenging, especially without risers or other aids—at least in terms of adequate cooling. The ROG Crosshair X670E offers 4 slots between the x16 slots, but you'd still require a riser from the lowest x4 position. It's not entirely aligned with using the 4060TI, though—are we specifically referring to video output?
Reply
Reply
K
KerimPlays
06-02-2023, 07:11 PM #2

I believe adding more than just dual-slot cards in an X670E-Creator will be challenging, especially without risers or other aids—at least in terms of adequate cooling. The ROG Crosshair X670E offers 4 slots between the x16 slots, but you'd still require a riser from the lowest x4 position. It's not entirely aligned with using the 4060TI, though—are we specifically referring to video output?

Reply
Reply