You're experiencing a low score and high temperatures while using the 13900k.
You're experiencing a low score and high temperatures while using the 13900k.
Sure, let's go through your setup step by step. Make sure everything matches the specifications you mentioned.
Check that your chassis is compatible with the Enthoo Evolv X Galaxy.
Confirm the MAG B760 motherboard supports your CPU model (Intel Core i9-13900K).
Verify the Corsair 32GB DDR5 5600MHz RAM is correctly installed and recognized.
Ensure the Palit GeForce 3090 Ti GPU is properly seated in the PCIe slot.
Double-check the PSU is rated for at least 100W to handle your 360W system.
Confirm the 1TB Seagate M2 7600Mb/s SSD is connected and recognized.
If you tried mounting the radiator on the intake, it might help improve airflow, but you didn’t see a noticeable change. Try moving it to the front or rear for better cooling.
Also, make sure your BIOS version matches the chipset and CPU requirements.
Let me know if you need help updating or adjusting any settings!
The expected power consumption around 36k aligns with Intel's limits on that chip. MSI typically applies the default Intel power caps on their B series boards. To adjust, enter BIOS, navigate to overclocking and advanced CPU settings, then set power limits to 4096W (maximum). Performance gains are unlikely given the thermal throttling you're seeing. For better heat management, consider undervolting. On B-series boards, this approach sometimes works but can cause sudden performance drops due to high stock voltages. A contact frame is also a worthwhile investment, costing around $10 and reducing temperatures by 5-10°C depending on conditions.
When the AIO is installed properly, the issue might stem from limited airflow due to the case's design.
I also reinstalled the AIO with fresh paste and began adjusting settings. After roughly three hours of tweaking, I reached around 38.5k with throttling and hit 36.5k with acceptable temperatures—though I did briefly throttle a few times using HWiNF. Dropping the restriction seems to be the fix...?
For optimal results, eliminate limitations and maintain a budget under 100 dollars