Your Ryzen 5600X runs at 0.6GHz under full load.
Your Ryzen 5600X runs at 0.6GHz under full load.
Consider a system update to resolve persistent issues. Adjust the manual all-core frequency multiplier to 45, set the vcore to 1.25v, and configure the LLC to a moderate setting. Ensure TDC, EDC, and power limits are configured at 4096, 65535, or similar values. This approach effectively removes hard limits, allowing the CPU to run at a stable 4.5GHz while reducing idle power consumption. The changes will stabilize performance without locking the system to a fixed frequency.
I wasn't asked to clean it. The instructions were clear about simplifying the process.
I made the updates as requested, but your PC isn't booting now.
I took out the fans and wiped them with a paper towel. When I removed the processor fan to clean it, I noticed the thermal paste was fully dry, so I replaced it and reinstalled it. After restarting the PC, it didn’t start properly, so I reset the BIOS and it began but now only runs at 1GHz or less. I’m unsure what to do next.
It seems your PC reaches a maximum temperature of 50°C, which could indicate overheating from the CPU or GPU.
Your temperatures were normal during the 1GHz operation. The main concern was the thermal paste change and the cleaning process. I’m curious—did you disconnect the PC from the power supply while working? It’s possible you might have caused a short circuit. Since you didn’t make any adjustments in the BIOS during cleaning, there’s nothing further to address that way.