Your PC is not posting yet. Please check the connection and try again.

F5F Stay Refreshed Hardware Desktop Your PC is not posting yet. Please check the connection and try again.

Pages (3): 1 2 3 Next

199

11-21-2016, 02:39 AM

I just completed setting up my parents' new PC. I upgraded and modified some components in my own machine, so I figured it was time to try one myself. When I power it on, the Wraith Stealth cooler begins spinning and the RAM LEDs light up, but I don’t see any connection to my monitor. I’ve tested both HDMI and DVI ports without success. The specifications are: Ryzen 3 3200G, MSI B450M A Pro Max Hyper, 8GB DDR4, Corsair Vengeance LPX, 240W power supply. I’ve already reinstalled the CPU and RAM, but nothing works. I attempted to clear the CMOS (read as a potential fix), yet it still doesn’t connect. If you have any suggestions, I’d really appreciate it.

BergliaNils

11-21-2016, 02:39 AM #1

lagmen
Junior Member

12-09-2016, 10:44 AM

First startup tends to take a bit longer with new hardware because the motherboard goes through to test each piece of hardware. How long have yuo waited for it to boot up?

lagmen

12-09-2016, 10:44 AM #2

First startup tends to take a bit longer with new hardware because the motherboard goes through to test each piece of hardware. How long have yuo waited for it to boot up?

Epsylon16
Member

209

12-09-2016, 11:26 AM

Yes, I double-checked all the connections.

Epsylon16

12-09-2016, 11:26 AM #3

Yes, I double-checked all the connections.

Tyazoyd
Member

12-09-2016, 04:49 PM

Ensure your RAM modules are properly aligned.

Tyazoyd

12-09-2016, 04:49 PM #4

Ensure your RAM modules are properly aligned.

Rubb_
Member

123

12-09-2016, 04:54 PM

I initially waited around two minutes. After that, I tried to restart it and waited five minutes, then restarted again and left it for ten to fifteen minutes.

Rubb_

12-09-2016, 04:54 PM #5

I initially waited around two minutes. After that, I tried to restart it and waited five minutes, then restarted again and left it for ten to fifteen minutes.

Skeetarr
Member

146

12-09-2016, 11:00 PM

Yes, every cable is linked, double-checked immediately after it failed to post.

Skeetarr

12-09-2016, 11:00 PM #6

Yes, every cable is linked, double-checked immediately after it failed to post.

Rounyx
Posting Freak

838

12-11-2016, 08:21 PM

I removed it and attempted to insert it into the opposite position, hoping it would fit correctly. Unfortunately, it didn't work.

Rounyx

12-11-2016, 08:21 PM #7

I removed it and attempted to insert it into the opposite position, hoping it would fit correctly. Unfortunately, it didn't work.

ninjakitty2
Member

132

12-11-2016, 11:18 PM

Consider updating the BIOS to the latest release. However, this particular version doesn't support updating the CPU without a dedicated processor. It might be better to verify each component individually on a functional system if one is available.

ninjakitty2

12-11-2016, 11:18 PM #8

ItzCh3nTi_YT
Member

12-11-2016, 11:48 PM

Sure, I'll give it a shot. On my personal computer I have an R5 2600x, which lets me check the motherboard and RAM but not the CPU. My own motherboard isn't compatible with the 3200g.

ItzCh3nTi_YT

12-11-2016, 11:48 PM #9

Sure, I'll give it a shot. On my personal computer I have an R5 2600x, which lets me check the motherboard and RAM but not the CPU. My own motherboard isn't compatible with the 3200g.

techiseasy
Senior Member

688

12-12-2016, 12:25 AM

#10

Consider a software upgrade. Visit the company's support site to confirm if the 3rd generation version is available.

techiseasy

12-12-2016, 12:25 AM #10

Consider a software upgrade. Visit the company's support site to confirm if the 3rd generation version is available.

Pages (3): 1 2 3 Next