F5F Stay Refreshed Hardware Desktop Your PBO seems unstable. It might be time to reassess its management.

Your PBO seems unstable. It might be time to reassess its management.

Your PBO seems unstable. It might be time to reassess its management.

Pages (3): Previous 1 2 3
T
twentyonechloe
Member
235
03-09-2021, 02:27 AM
#21
The reading of 1.525v is clearly elevated for the stock. If your voltage is set to stock and PBO is turned off, you might be at unsafe LLC levels. I haven’t seen mine exceed 1.488 even with various PBO settings. Google suggests up to 1.55v is typical, though 1.525v with standard limits seems unusual.
T
twentyonechloe
03-09-2021, 02:27 AM #21

The reading of 1.525v is clearly elevated for the stock. If your voltage is set to stock and PBO is turned off, you might be at unsafe LLC levels. I haven’t seen mine exceed 1.488 even with various PBO settings. Google suggests up to 1.55v is typical, though 1.525v with standard limits seems unusual.

K
Kyokushin_YT
Member
184
03-09-2021, 11:11 AM
#22
I used a X73 kraken 360mm, but the noctua dh15 performs better.
K
Kyokushin_YT
03-09-2021, 11:11 AM #22

I used a X73 kraken 360mm, but the noctua dh15 performs better.

F
Fireking124
Senior Member
576
03-15-2021, 11:49 PM
#23
1.525 was the VDD value, but the "vcore" on the top of hwmonitor hasn't reached 1.5, I don't think
F
Fireking124
03-15-2021, 11:49 PM #23

1.525 was the VDD value, but the "vcore" on the top of hwmonitor hasn't reached 1.5, I don't think

U
UnicornCracker
Senior Member
663
03-16-2021, 12:18 AM
#24
I'll configure the default settings and execute R23.
U
UnicornCracker
03-16-2021, 12:18 AM #24

I'll configure the default settings and execute R23.

A
Alphagon96
Junior Member
43
03-25-2021, 10:23 AM
#25
Stock reaching 1.500v VID, 1.481vcore. You can configure a negative PBO curve optimizer with standard power caps; it reduces voltages for light/single-core loads and limits frequency to around 142 watts. I use a PBO optimizer with higher caps, adjusting them as much as possible while keeping temperatures acceptable.
A
Alphagon96
03-25-2021, 10:23 AM #25

Stock reaching 1.500v VID, 1.481vcore. You can configure a negative PBO curve optimizer with standard power caps; it reduces voltages for light/single-core loads and limits frequency to around 142 watts. I use a PBO optimizer with higher caps, adjusting them as much as possible while keeping temperatures acceptable.

Pages (3): Previous 1 2 3