Your new RAM isn't operating at the intended speed.

F5F Stay Refreshed Hardware Desktop Your new RAM isn't operating at the intended speed.

MAZ531
Member

164

04-14-2016, 02:03 AM

I just swapped... Corsair Dominator Platinum DHX 32GB (2x16GB) DDR4 2800MHz (Extreme-Performance) for... Corsair Dominator Platinum RGB 32GB (2x16GB) DDR4 3200 (PC4-25600) C16 1.35V. In Task Manager it shows the new RAM speed matches the old one. Shouldn't it be 3200? I only have the new RAM now. The previous RAM was removed because the system wouldn't boot with both installed, which was unexpected. My motherboard is Asus Z170 Pro Gaming. The new RAM went into the third and fourth slots, while the old one was in the second and fourth.

MAZ531

04-14-2016, 02:03 AM #1

icemath63
Member

04-18-2016, 12:25 AM

add the update to the second and fourth positions too. open BIOS and turn on XMP support.

icemath63

04-18-2016, 12:25 AM #2

add the update to the second and fourth positions too. open BIOS and turn on XMP support.

esprimer
Junior Member

04-18-2016, 08:12 AM

All the RAM modules will function together at identical rates. The performance will match the lowest-speed module. This is set at 2800.

esprimer

04-18-2016, 08:12 AM #3

All the RAM modules will function together at identical rates. The performance will match the lowest-speed module. This is set at 2800.

Asianposse145
Member

152

04-18-2016, 03:53 PM

Based on the post, the old sticks are missing.

Asianposse145

04-18-2016, 03:53 PM #4

Based on the post, the old sticks are missing.

Aldiin_
Junior Member

04-20-2016, 07:23 PM

Great! You're welcome!

Aldiin_

04-20-2016, 07:23 PM #5

Great! You're welcome!

ChilledPyro
Junior Member

04-21-2016, 03:39 AM

Great, I was able to assist. Please note the thread is marked as solved for others seeking similar information.

ChilledPyro

04-21-2016, 03:39 AM #6

Great, I was able to assist. Please note the thread is marked as solved for others seeking similar information.