F5F Stay Refreshed Hardware Desktop Your initial computer is not starting.

Your initial computer is not starting.

Your initial computer is not starting.

Pages (3): 1 2 3 Next
D
Disco_Master
Member
163
01-21-2018, 06:24 PM
#1
Hey everyone, I hope you can assist me with this issue. My first PC isn’t booting into BIOS, and I see a bright orange light on the motherboard near the RAM sticks. I’ve checked the motherboard manual which mentions booting problems. Here are my specs: motherboard: ASUS ROG Strix B450-F gaming, CPU: Ryzen 5 2600, GPU: RX 580 by Gigabyte WindForce, RAM: Vengeance LPX 2x8 GB at 3000MHz, PSU: Gigabyte GP-G750H, plus an NVMe SSD and a 2TB HDD. I swapped out the PSU to Corsair CX 550M and tried different RAM (G.Skill Trident Z RGB 2666 MHz), but the problem persists. I still don’t get any signals to my monitor, and the orange light remains. I bought the CPU from an outlet, so it might have been damaged, though I’m not sure. The CPU is the last thing I’d change. I noticed the DRAM module in the motherboard has a malfunction indicator light, but I’m unsure how to fix that. Also, I’ve tried three different RAM brands and the issue continues. I just managed to fix it by straightening some bent pins on the motherboard with a razor. Thanks for your help!
D
Disco_Master
01-21-2018, 06:24 PM #1

Hey everyone, I hope you can assist me with this issue. My first PC isn’t booting into BIOS, and I see a bright orange light on the motherboard near the RAM sticks. I’ve checked the motherboard manual which mentions booting problems. Here are my specs: motherboard: ASUS ROG Strix B450-F gaming, CPU: Ryzen 5 2600, GPU: RX 580 by Gigabyte WindForce, RAM: Vengeance LPX 2x8 GB at 3000MHz, PSU: Gigabyte GP-G750H, plus an NVMe SSD and a 2TB HDD. I swapped out the PSU to Corsair CX 550M and tried different RAM (G.Skill Trident Z RGB 2666 MHz), but the problem persists. I still don’t get any signals to my monitor, and the orange light remains. I bought the CPU from an outlet, so it might have been damaged, though I’m not sure. The CPU is the last thing I’d change. I noticed the DRAM module in the motherboard has a malfunction indicator light, but I’m unsure how to fix that. Also, I’ve tried three different RAM brands and the issue continues. I just managed to fix it by straightening some bent pins on the motherboard with a razor. Thanks for your help!

N
NoisyBomber
Junior Member
21
02-06-2018, 02:56 AM
#2
Ensure the memory is placed in the proper sockets. This is important. Consult your user guide for guidance.
N
NoisyBomber
02-06-2018, 02:56 AM #2

Ensure the memory is placed in the proper sockets. This is important. Consult your user guide for guidance.

G
Ghosteyez
Member
123
02-06-2018, 03:52 AM
#3
Yes, I utilized motherboard standoffs.
G
Ghosteyez
02-06-2018, 03:52 AM #3

Yes, I utilized motherboard standoffs.

M
MrBronze_IV
Junior Member
8
02-06-2018, 05:14 AM
#4
Yeah, why?
M
MrBronze_IV
02-06-2018, 05:14 AM #4

Yeah, why?

S
sixpar
Member
137
02-06-2018, 07:12 AM
#5
Without it, the circuit will fail.
S
sixpar
02-06-2018, 07:12 AM #5

Without it, the circuit will fail.

S
SoulRawr
Member
191
02-07-2018, 05:09 AM
#6
Have you experimented with varying the RAM placement, as this sometimes resolves issues? Also, are you connecting the video output to the GPU instead of the motherboard? Edit: I also observed the 6-Pin Connector isn’t installed on your GPU—could that be the cause or was it previously connected?
S
SoulRawr
02-07-2018, 05:09 AM #6

Have you experimented with varying the RAM placement, as this sometimes resolves issues? Also, are you connecting the video output to the GPU instead of the motherboard? Edit: I also observed the 6-Pin Connector isn’t installed on your GPU—could that be the cause or was it previously connected?

D
DonMcOne
Member
188
02-07-2018, 01:15 PM
#7
There isn't any RAM visible in your photo.
D
DonMcOne
02-07-2018, 01:15 PM #7

There isn't any RAM visible in your photo.

S
Sukibooki
Member
204
02-09-2018, 08:10 AM
#8
Absolutely understood. Plus, disconnecting the power cord from my CPU to the motherboard doesn't cause the lights to flicker.
S
Sukibooki
02-09-2018, 08:10 AM #8

Absolutely understood. Plus, disconnecting the power cord from my CPU to the motherboard doesn't cause the lights to flicker.

L
Lococowboy13
Junior Member
3
02-11-2018, 05:22 PM
#9
Yeah, I get it too, just trust me.
L
Lococowboy13
02-11-2018, 05:22 PM #9

Yeah, I get it too, just trust me.

C
Clash50
Member
60
02-18-2018, 10:01 AM
#10
I've tested various slots too, and it had been connected before. I unplugged the cables but still wanted to see the orange light.
C
Clash50
02-18-2018, 10:01 AM #10

I've tested various slots too, and it had been connected before. I unplugged the cables but still wanted to see the orange light.

Pages (3): 1 2 3 Next