F5F Stay Refreshed Hardware Desktop your gpu isn't showing any visuals because you're only seeing output from igpu, not the actual display.

your gpu isn't showing any visuals because you're only seeing output from igpu, not the actual display.

your gpu isn't showing any visuals because you're only seeing output from igpu, not the actual display.

E
Explor
Member
58
06-06-2022, 12:46 PM
#1
every component is brand new Intel A750 i5 13600k Z690 Aura Elite with DDR5 6000mhz, 16gb RAM, one stick.
E
Explor
06-06-2022, 12:46 PM #1

every component is brand new Intel A750 i5 13600k Z690 Aura Elite with DDR5 6000mhz, 16gb RAM, one stick.

R
RainbowGirl328
Member
108
06-08-2022, 09:27 AM
#2
Review your system information. Make sure your GPU is recognized and examine the configuration options. They often include an option to distinguish between external and built-in GPUs, which may be set to automatic or just internal. Adjust it to use the external one by default if available.
R
RainbowGirl328
06-08-2022, 09:27 AM #2

Review your system information. Make sure your GPU is recognized and examine the configuration options. They often include an option to distinguish between external and built-in GPUs, which may be set to automatic or just internal. Adjust it to use the external one by default if available.

C
Creeperman3
Senior Member
454
06-09-2022, 11:22 AM
#3
I looked for a PCI on the motherboard BIOS but didn't find anything attached.
C
Creeperman3
06-09-2022, 11:22 AM #3

I looked for a PCI on the motherboard BIOS but didn't find anything attached.

F
filipl02
Member
59
06-14-2022, 06:50 PM
#4
When working with igpu, verify that your BIOS settings for graphics and PCIe are set to Gen 3 or Gen 4. Confirm the details for your specific board or card. Also, check if you're using a PCIe riser.
F
filipl02
06-14-2022, 06:50 PM #4

When working with igpu, verify that your BIOS settings for graphics and PCIe are set to Gen 3 or Gen 4. Confirm the details for your specific board or card. Also, check if you're using a PCIe riser.

M
Milad_PvP
Member
116
06-16-2022, 05:52 PM
#5
i don’t understand gen 3 4, when i disconnect everything and power it on, it works perfectly. but if i put it together without taking out the gpu, then connect the psu cable and case cable, it still doesn’t work—there’s no output. the gpu fan spins for just a few seconds, and even after downgrading my bios version, nothing happens.
M
Milad_PvP
06-16-2022, 05:52 PM #5

i don’t understand gen 3 4, when i disconnect everything and power it on, it works perfectly. but if i put it together without taking out the gpu, then connect the psu cable and case cable, it still doesn’t work—there’s no output. the gpu fan spins for just a few seconds, and even after downgrading my bios version, nothing happens.

H
house_owner_1
Member
204
06-17-2022, 08:51 PM
#6
Ensure the installation is correct outside the case, but verify functionality inside. Confirm all motherboard mounting holes are properly positioned. A missing or misplaced stud can disrupt operation.
H
house_owner_1
06-17-2022, 08:51 PM #6

Ensure the installation is correct outside the case, but verify functionality inside. Confirm all motherboard mounting holes are properly positioned. A missing or misplaced stud can disrupt operation.