F5F Stay Refreshed Hardware Desktop Your device appears to have some unusual behavior.

Your device appears to have some unusual behavior.

Your device appears to have some unusual behavior.

T
TurtelManPRO
Junior Member
5
04-20-2017, 12:13 PM
#1
I'm facing several persistent issues that have become more frequent over time. First, when attempting to power on the computer, I often need to adjust and reposition the CPU, GPU, and RAM, clear the CMOS, etc., before it even starts. This usually happens every time I shut it down. (Even after clearing it, it tends to stay on with debug lights on the DRAM, GPU, and CPU—only when I lightly tap the CPU cooler does it boot.)

Second, I recently acquired a used RX 580 from a friend. I use three monitors—two HDMI and one DVI—and everything works fine except for the DVI monitor, which only functions when connected to the HDMI TV. The HDMI display works regardless, though I can't explain why. I've tried installing my old GPU and reinstalling drivers, but nothing seems to resolve the problem.

Third, I play racing games like Forza Horizon 4 on my old GPU, which always worked before. Now it doesn't function with the RX 580. I'm struggling to figure out what's going wrong with all these setups.
T
TurtelManPRO
04-20-2017, 12:13 PM #1

I'm facing several persistent issues that have become more frequent over time. First, when attempting to power on the computer, I often need to adjust and reposition the CPU, GPU, and RAM, clear the CMOS, etc., before it even starts. This usually happens every time I shut it down. (Even after clearing it, it tends to stay on with debug lights on the DRAM, GPU, and CPU—only when I lightly tap the CPU cooler does it boot.)

Second, I recently acquired a used RX 580 from a friend. I use three monitors—two HDMI and one DVI—and everything works fine except for the DVI monitor, which only functions when connected to the HDMI TV. The HDMI display works regardless, though I can't explain why. I've tried installing my old GPU and reinstalling drivers, but nothing seems to resolve the problem.

Third, I play racing games like Forza Horizon 4 on my old GPU, which always worked before. Now it doesn't function with the RX 580. I'm struggling to figure out what's going wrong with all these setups.

L
LaraDancer
Member
57
04-20-2017, 04:27 PM
#2
It seems the power source is experiencing issues.
L
LaraDancer
04-20-2017, 04:27 PM #2

It seems the power source is experiencing issues.

A
acarnan1
Member
100
04-22-2017, 03:13 PM
#3
Initially I assumed this too, yet I used an extra power supply I had on hand, which didn't resolve the issue.
A
acarnan1
04-22-2017, 03:13 PM #3

Initially I assumed this too, yet I used an extra power supply I had on hand, which didn't resolve the issue.

J
JimBLogic
Junior Member
24
05-02-2017, 06:18 PM
#4
Forza titles on PC have often puzzled me; I haven’t installed Horizon 4 yet, but I faced the same problem with Forza 7. Try removing and readding it to check if the issue persists.
J
JimBLogic
05-02-2017, 06:18 PM #4

Forza titles on PC have often puzzled me; I haven’t installed Horizon 4 yet, but I faced the same problem with Forza 7. Try removing and readding it to check if the issue persists.

_
_tomgaming_1
Junior Member
2
05-06-2017, 02:44 AM
#5
The RX 580 typically uses one HDMI port and one DVI connector, which is standard for dual connectivity. If your monitors support DisplayPort, you might want to invest in a suitable adapter or cable. Regarding the power issue, unplugging the PSU briefly could reset internal protections that require full discharge—disconnecting the power cable usually helps. It’s possible a BIOS or chipset problem is interfering with the 5V standby mode, which keeps the motherboard powered. Check the BIOS settings and disable low-power states if needed. For Fortnite, consult community forums for reset procedures or safe mode options, then adjust settings accordingly. If the game still misidentifies your GPU, try connecting it to a different PCIe slot (like X16) on the motherboard, which uses a different chipset and may support NVIDIA cards directly. Adjusting in-game settings via the NVIDIA control panel or through save files can also resolve persistent issues.
_
_tomgaming_1
05-06-2017, 02:44 AM #5

The RX 580 typically uses one HDMI port and one DVI connector, which is standard for dual connectivity. If your monitors support DisplayPort, you might want to invest in a suitable adapter or cable. Regarding the power issue, unplugging the PSU briefly could reset internal protections that require full discharge—disconnecting the power cable usually helps. It’s possible a BIOS or chipset problem is interfering with the 5V standby mode, which keeps the motherboard powered. Check the BIOS settings and disable low-power states if needed. For Fortnite, consult community forums for reset procedures or safe mode options, then adjust settings accordingly. If the game still misidentifies your GPU, try connecting it to a different PCIe slot (like X16) on the motherboard, which uses a different chipset and may support NVIDIA cards directly. Adjusting in-game settings via the NVIDIA control panel or through save files can also resolve persistent issues.

L
Legeis
Junior Member
3
05-11-2017, 04:02 PM
#6
It might be your cooling system failing, causing overheating and preventing the system from booting. If you didn’t install a CPU cooler and tried booting without one, switching to the built-in cooler could help. If the issue continues, run diagnostics like memtest and thoroughly test each RAM module individually. Check one stick at a time and compare results. If nothing changes, the problem likely lies with the motherboard. Try placing your CPU in another computer for stress testing (e.g., Intel Burner) to see if it runs. If tests pass, the motherboard is probably faulty. If not, replace the cooler or component accordingly. Ensure any cleaning fluid used during testing is non-conductive.
L
Legeis
05-11-2017, 04:02 PM #6

It might be your cooling system failing, causing overheating and preventing the system from booting. If you didn’t install a CPU cooler and tried booting without one, switching to the built-in cooler could help. If the issue continues, run diagnostics like memtest and thoroughly test each RAM module individually. Check one stick at a time and compare results. If nothing changes, the problem likely lies with the motherboard. Try placing your CPU in another computer for stress testing (e.g., Intel Burner) to see if it runs. If tests pass, the motherboard is probably faulty. If not, replace the cooler or component accordingly. Ensure any cleaning fluid used during testing is non-conductive.

A
Ailinie
Member
160
05-13-2017, 11:37 AM
#7
I've removed it before and I'm attempting to reinstall now.
A
Ailinie
05-13-2017, 11:37 AM #7

I've removed it before and I'm attempting to reinstall now.

B
baconandfries
Member
215
05-14-2017, 09:57 AM
#8
I'll give it a shot. I had them for a while, but the drivers were behaving strangely.
B
baconandfries
05-14-2017, 09:57 AM #8

I'll give it a shot. I had them for a while, but the drivers were behaving strangely.

N
Nevik
Member
196
05-21-2017, 10:11 AM
#9
I cooked an old Mobo using that, but the new one should work too. Occasionally the power switch fails—I have to move the connector or use some clever workaround.
N
Nevik
05-21-2017, 10:11 AM #9

I cooked an old Mobo using that, but the new one should work too. Occasionally the power switch fails—I have to move the connector or use some clever workaround.

I
I_Pux
Member
60
05-21-2017, 10:27 AM
#10
This refers to the built-in loop. Here you found the solution... just discard that and try the custom cooler too, because the moisture from several tiny leaks could have damaged the pin connections, which is why it fails to start when you press it.
I
I_Pux
05-21-2017, 10:27 AM #10

This refers to the built-in loop. Here you found the solution... just discard that and try the custom cooler too, because the moisture from several tiny leaks could have damaged the pin connections, which is why it fails to start when you press it.