F5F Stay Refreshed Hardware Desktop Your computer won’t start or load properly when using two RAM sticks together.

Your computer won’t start or load properly when using two RAM sticks together.

Your computer won’t start or load properly when using two RAM sticks together.

Pages (2): 1 2 Next
N
NightBlue_3
Junior Member
42
11-20-2021, 01:29 AM
#1
Hello, I assembled this machine about a year ago and it functioned flawlessly until Tuesday, 8th December. While playing the same game as before, it suddenly halted and wouldn't boot again. I had to turn off the power and restart, but it didn't come back online (it normally opened with the Windows logo and security mode, so I thought I needed to cut power to start). My setup includes: CPU – Ryzen 5 2600, GPU – Nvidia GTX 1660 Ti, 8GB RAM, HyperX fury DDR4 2666mHz, case, PSU – cooler master MWE Gold 550 Full Modular. OS is Windows 10 version 1803 (build 17134.1345). I checked numerous forums but found no solutions. The motherboard lacks built-in buzzers or LEDs for diagnostics. Restarting only worked after removing a RAM stick. Both sticks were in slots 2 and 4, which previously functioned. Now, having two sticks plugged in causes issues; each works alone, detected by Windows and BIOS. I tried resetting the CMOS: placing a stick in slot 1 or 3 made the GPU stop after a few seconds, but slots 2 and 4 booted normally. I tested every possible dual-stick configuration (slots 1-3 & 2-4), but nothing changed. I also opened BIOS to see if it affected detection. After updating BIOS, slot 2 & 4 showed a black screen with GPU fan failure, then briefly worked again. In the BIOS I set RAM values to "auto" – no difference. I activated a setting that apparently disabled RAM, but didn’t notice any impact. Sorry for the lengthy explanation. As a student with only 8GB of RAM, my computer is having trouble running simulations. Apologies for any typos or English mistakes; French forums seem quiet.
N
NightBlue_3
11-20-2021, 01:29 AM #1

Hello, I assembled this machine about a year ago and it functioned flawlessly until Tuesday, 8th December. While playing the same game as before, it suddenly halted and wouldn't boot again. I had to turn off the power and restart, but it didn't come back online (it normally opened with the Windows logo and security mode, so I thought I needed to cut power to start). My setup includes: CPU – Ryzen 5 2600, GPU – Nvidia GTX 1660 Ti, 8GB RAM, HyperX fury DDR4 2666mHz, case, PSU – cooler master MWE Gold 550 Full Modular. OS is Windows 10 version 1803 (build 17134.1345). I checked numerous forums but found no solutions. The motherboard lacks built-in buzzers or LEDs for diagnostics. Restarting only worked after removing a RAM stick. Both sticks were in slots 2 and 4, which previously functioned. Now, having two sticks plugged in causes issues; each works alone, detected by Windows and BIOS. I tried resetting the CMOS: placing a stick in slot 1 or 3 made the GPU stop after a few seconds, but slots 2 and 4 booted normally. I tested every possible dual-stick configuration (slots 1-3 & 2-4), but nothing changed. I also opened BIOS to see if it affected detection. After updating BIOS, slot 2 & 4 showed a black screen with GPU fan failure, then briefly worked again. In the BIOS I set RAM values to "auto" – no difference. I activated a setting that apparently disabled RAM, but didn’t notice any impact. Sorry for the lengthy explanation. As a student with only 8GB of RAM, my computer is having trouble running simulations. Apologies for any typos or English mistakes; French forums seem quiet.

M
mozzer06
Member
56
11-20-2021, 01:29 AM
#2
It seems you're asking about whether your system requires all RAM modules to work together or if a faulty one can prevent booting. If the latter, it may only start with two modules functioning properly.
M
mozzer06
11-20-2021, 01:29 AM #2

It seems you're asking about whether your system requires all RAM modules to work together or if a faulty one can prevent booting. If the latter, it may only start with two modules functioning properly.

D
Dynuzard
Junior Member
46
11-20-2021, 01:29 AM
#3
.
D
Dynuzard
11-20-2021, 01:29 AM #3

.

P
papanik1
Junior Member
14
11-20-2021, 01:29 AM
#4
I don't know if the only RAM I have is the one mentioned in my first post—I actually have two. They were functioning well, but combining them caused a boot issue. I was thinking about replacing them with a new pair, but if it's related to the motherboard, I should keep my current RAM and swap this one out. I can't afford to buy both.
P
papanik1
11-20-2021, 01:29 AM #4

I don't know if the only RAM I have is the one mentioned in my first post—I actually have two. They were functioning well, but combining them caused a boot issue. I was thinking about replacing them with a new pair, but if it's related to the motherboard, I should keep my current RAM and swap this one out. I can't afford to buy both.

O
ownist
Member
177
11-20-2021, 01:29 AM
#5
It depends on what you mean by "put one in it" and "put the other in it." If they both function, then it might work. If not, you'll need more details.
O
ownist
11-20-2021, 01:29 AM #5

It depends on what you mean by "put one in it" and "put the other in it." If they both function, then it might work. If not, you'll need more details.

B
174
11-20-2021, 01:29 AM
#6
yes
B
BudderKing0428
11-20-2021, 01:29 AM #6

yes

V
Vesuvion
Junior Member
40
11-20-2021, 01:29 AM
#7
So then my scenario collapses.
V
Vesuvion
11-20-2021, 01:29 AM #7

So then my scenario collapses.

D
Dragonstar126
Junior Member
3
11-20-2021, 01:29 AM
#8
It’s a shame, but memory isn’t very reliable. This situation smells like a costly hardware issue. Maybe you should recheck the cables and try re-flashing the BIOS in case there’s software trouble. I’m not optimistic though—possibly the CPU or motherboard is the problem. You might also consider buying an add-on motherboard speaker; it could give you more diagnostic info at a reasonable price.
D
Dragonstar126
11-20-2021, 01:29 AM #8

It’s a shame, but memory isn’t very reliable. This situation smells like a costly hardware issue. Maybe you should recheck the cables and try re-flashing the BIOS in case there’s software trouble. I’m not optimistic though—possibly the CPU or motherboard is the problem. You might also consider buying an add-on motherboard speaker; it could give you more diagnostic info at a reasonable price.

M
Mackonaut
Member
145
11-20-2021, 01:29 AM
#9
I don't even have a chance to test my RAM on another machine. At least my system is running and functional. But 8 gigabytes is quite slow. I checked some specifications and found this option that wasn't too costly and had positive feedback: Asus TUF B450 PLUS GAMING. I examined it and it looks compatible with my CPU and RAM, though I'm not sure how to verify that. If you have solid suggestions for RAM or memory size, I'd appreciate them. Thanks!
M
Mackonaut
11-20-2021, 01:29 AM #9

I don't even have a chance to test my RAM on another machine. At least my system is running and functional. But 8 gigabytes is quite slow. I checked some specifications and found this option that wasn't too costly and had positive feedback: Asus TUF B450 PLUS GAMING. I examined it and it looks compatible with my CPU and RAM, though I'm not sure how to verify that. If you have solid suggestions for RAM or memory size, I'd appreciate them. Thanks!

P
penguin0cat
Junior Member
27
11-20-2021, 01:29 AM
#10
Run memtest86 on each drive. Both seem to function properly. An 8GB single channel isn’t very fast, but it works fine. Some games will run adequately. For MBs, look up the tierlist in the motherboards section. I’d likely grab a speaker myself—they’re inexpensive and useful for identifying CPU or board problems.
P
penguin0cat
11-20-2021, 01:29 AM #10

Run memtest86 on each drive. Both seem to function properly. An 8GB single channel isn’t very fast, but it works fine. Some games will run adequately. For MBs, look up the tierlist in the motherboards section. I’d likely grab a speaker myself—they’re inexpensive and useful for identifying CPU or board problems.

Pages (2): 1 2 Next