F5F Stay Refreshed Hardware Desktop Your computer isn't functioning properly.

Your computer isn't functioning properly.

Your computer isn't functioning properly.

Pages (3): 1 2 3 Next
A
AdrianaC_019
Junior Member
6
06-27-2018, 07:09 AM
#1
I installed a GPU for testing and monitoring temps, yet after powering off the PC, restarting it, and tweaking BIOS settings it still lacks video output. I took out the battery from the BIOS, removed the RAM and cleaned the components and slots, took out the processor and cleaned it too, but video remains absent. I’m unsure what’s causing this and need the system to function quickly. CPU specs: APU, Athlon 3000g; RAM: Patriot Viper, 8GB and P NY, 8GB at 2666MHz; dual channel PSU: SNP550-HS; SSD: generic 240GB motherboard; motherboard: MSI A320M A PRO MAX. Video file: VID_20240322_225558.mp4
A
AdrianaC_019
06-27-2018, 07:09 AM #1

I installed a GPU for testing and monitoring temps, yet after powering off the PC, restarting it, and tweaking BIOS settings it still lacks video output. I took out the battery from the BIOS, removed the RAM and cleaned the components and slots, took out the processor and cleaned it too, but video remains absent. I’m unsure what’s causing this and need the system to function quickly. CPU specs: APU, Athlon 3000g; RAM: Patriot Viper, 8GB and P NY, 8GB at 2666MHz; dual channel PSU: SNP550-HS; SSD: generic 240GB motherboard; motherboard: MSI A320M A PRO MAX. Video file: VID_20240322_225558.mp4

J
Jarzzermann
Posting Freak
788
06-27-2018, 07:09 AM
#2
Check if the onboard video is connected, as the 3000G includes built-in video which may have been set to use it.
J
Jarzzermann
06-27-2018, 07:09 AM #2

Check if the onboard video is connected, as the 3000G includes built-in video which may have been set to use it.

C
Cusack
Junior Member
47
06-27-2018, 07:10 AM
#3
The HDMI connection is set up, yet the devices aren't functioning.
C
Cusack
06-27-2018, 07:10 AM #3

The HDMI connection is set up, yet the devices aren't functioning.

9
905xA
Senior Member
667
06-27-2018, 07:10 AM
#4
The EZ Debug LED illuminates when there are errors or issues detected during debugging.
9
905xA
06-27-2018, 07:10 AM #4

The EZ Debug LED illuminates when there are errors or issues detected during debugging.

S
Screwy95
Junior Member
7
06-27-2018, 07:10 AM
#5
My motherboard lacked LEDs.
S
Screwy95
06-27-2018, 07:10 AM #5

My motherboard lacked LEDs.

M
Milkcow289
Member
62
06-27-2018, 07:10 AM
#6
The battery for the CMOS chip was removed for approximately one month.
M
Milkcow289
06-27-2018, 07:10 AM #6

The battery for the CMOS chip was removed for approximately one month.

M
MarioCovrigel
Member
195
06-27-2018, 07:10 AM
#7
The time refers to a brief moment, highlighting its brevity.
M
MarioCovrigel
06-27-2018, 07:10 AM #7

The time refers to a brief moment, highlighting its brevity.

I
IBlueiceI
Junior Member
33
06-27-2018, 07:10 AM
#8
Ensure the system is powered down by switching off the electricity or disconnecting it from the mains. If necessary, discharge the unit by pressing the power button once the conditions are met. Once the battery is removed, allow it to sit uncovered for approximately ten minutes before reinserting it.
I
IBlueiceI
06-27-2018, 07:10 AM #8

Ensure the system is powered down by switching off the electricity or disconnecting it from the mains. If necessary, discharge the unit by pressing the power button once the conditions are met. Once the battery is removed, allow it to sit uncovered for approximately ten minutes before reinserting it.

T
ThatMiningGuy
Senior Member
704
06-27-2018, 07:10 AM
#9
I don’t harm your motherboard or any part.
T
ThatMiningGuy
06-27-2018, 07:10 AM #9

I don’t harm your motherboard or any part.

M
MechaKiwi01
Member
159
06-27-2018, 07:10 AM
#10
I understand you're not a fan of your power supply, that's fine.
M
MechaKiwi01
06-27-2018, 07:10 AM #10

I understand you're not a fan of your power supply, that's fine.

Pages (3): 1 2 3 Next