F5F Stay Refreshed Hardware Desktop Your computer is stuck and not responding.

Your computer is stuck and not responding.

Your computer is stuck and not responding.

J
Jany_6688
Member
69
04-25-2021, 09:44 PM
#1
You were just enjoying some music when it suddenly stopped and everything froze on your screen. The motherboard light is orange, and the power button isn’t working. Your PC has a B450-F ROG STRIX R5 with 3600 MHz processor, 3060 Ti RAM, 1200W Platinum PSU, and you’re using Corsair products. You have a hard drive, SSD, and M.2 SSD. Should you shut down the PC through the PSU?
J
Jany_6688
04-25-2021, 09:44 PM #1

You were just enjoying some music when it suddenly stopped and everything froze on your screen. The motherboard light is orange, and the power button isn’t working. Your PC has a B450-F ROG STRIX R5 with 3600 MHz processor, 3060 Ti RAM, 1200W Platinum PSU, and you’re using Corsair products. You have a hard drive, SSD, and M.2 SSD. Should you shut down the PC through the PSU?

M
Maail99
Member
161
04-27-2021, 02:52 PM
#2
Disable the PC through the PSU switch, let it sit for 5 minutes, then power it back on. Please share additional details and upload a video if possible.
M
Maail99
04-27-2021, 02:52 PM #2

Disable the PC through the PSU switch, let it sit for 5 minutes, then power it back on. Please share additional details and upload a video if possible.

L
Lacomas
Junior Member
48
04-29-2021, 01:14 PM
#3
Consider checking the RAM issue. Run the Windows RAM diagnostic tool and review the outcomes.
L
Lacomas
04-29-2021, 01:14 PM #3

Consider checking the RAM issue. Run the Windows RAM diagnostic tool and review the outcomes.

S
S0ulGamerBR
Junior Member
3
04-29-2021, 01:51 PM
#4
If this happens again, consider investigating further. Review your error logs in the Event Viewer. Ensure all cables are securely connected and verify there are no conflicting background processes. Everything seems to be functioning normally so far.
S
S0ulGamerBR
04-29-2021, 01:51 PM #4

If this happens again, consider investigating further. Review your error logs in the Event Viewer. Ensure all cables are securely connected and verify there are no conflicting background processes. Everything seems to be functioning normally so far.