F5F Stay Refreshed Hardware Desktop Your computer is continuously restarting quickly.

Your computer is continuously restarting quickly.

Your computer is continuously restarting quickly.

B
bear7001
Senior Member
448
10-15-2018, 12:41 AM
#1
Attempted to install additional fans and encountered a 1-pin bend on my 2700x board. I'm unsure if this was caused by the CPU or a faulty connection to the power supply file IMG_3428.mov.
B
bear7001
10-15-2018, 12:41 AM #1

Attempted to install additional fans and encountered a 1-pin bend on my 2700x board. I'm unsure if this was caused by the CPU or a faulty connection to the power supply file IMG_3428.mov.

S
SneakyNeeky
Junior Member
20
10-15-2018, 01:02 AM
#2
I handled it by checking the situation carefully. You didn’t have to remove the CPU cooler just to fit case fans. It’s possible you were working on a partially done task while adjusting the pins. Reassess the setup using your phone camera from various angles can provide clearer insight. If the system restarts multiple times, allow it to finish. However, if it runs for an extended period without booting, there’s likely a problem. Testing with a single stick of RAM might help identify the issue.
S
SneakyNeeky
10-15-2018, 01:02 AM #2

I handled it by checking the situation carefully. You didn’t have to remove the CPU cooler just to fit case fans. It’s possible you were working on a partially done task while adjusting the pins. Reassess the setup using your phone camera from various angles can provide clearer insight. If the system restarts multiple times, allow it to finish. However, if it runs for an extended period without booting, there’s likely a problem. Testing with a single stick of RAM might help identify the issue.

H
HaloDXXIII
Member
52
10-15-2018, 03:02 PM
#3
The motherboard is extremely compact, making it hard to work without taking off the GPU and CPU coolers. The thermal paste on the cooler feels overly sticky when you remove it, suggesting a possible mount issue. Attempting to install just one RAM stick hasn't resolved the problem.
H
HaloDXXIII
10-15-2018, 03:02 PM #3

The motherboard is extremely compact, making it hard to work without taking off the GPU and CPU coolers. The thermal paste on the cooler feels overly sticky when you remove it, suggesting a possible mount issue. Attempting to install just one RAM stick hasn't resolved the problem.

C
ChimeZ
Junior Member
4
10-22-2018, 03:34 AM
#4
Experience the power of Ryzen before AM5. Remove the CPU carefully and attempt a proper setup this time. Use your phone camera to zoom in while holding it with one hand. With the other hand, use tweezers to straighten the pins. Pass a sharp object through it, but first locate any faulty pins. You’ll see issues clearly when you adjust the view with your camera and rotate the chip. Avoid touching pins with your fingers to prevent further damage. If you’re confident all pins are intact and functioning, proceed—otherwise, the CPU might still be okay.
C
ChimeZ
10-22-2018, 03:34 AM #4

Experience the power of Ryzen before AM5. Remove the CPU carefully and attempt a proper setup this time. Use your phone camera to zoom in while holding it with one hand. With the other hand, use tweezers to straighten the pins. Pass a sharp object through it, but first locate any faulty pins. You’ll see issues clearly when you adjust the view with your camera and rotate the chip. Avoid touching pins with your fingers to prevent further damage. If you’re confident all pins are intact and functioning, proceed—otherwise, the CPU might still be okay.

_
_Blockboy_
Junior Member
33
10-22-2018, 07:42 PM
#5
It managed to fight for what it was worth, but it crashed after 30 seconds. Not sure if it's still running.
_
_Blockboy_
10-22-2018, 07:42 PM #5

It managed to fight for what it was worth, but it crashed after 30 seconds. Not sure if it's still running.