You want to get your PC online and powered up remotely.
You want to get your PC online and powered up remotely.
You're trying to connect your PC to the internet from another network using WOL, a magic package, or by opening a port on the router. The main challenge is doing this over the internet itself. I found some solutions online: you can make your IP address fixed or use a DDNS service, place your PC inside the router's MAC address list, or open a port on the router.
Your TP-Link Deco X20 has limited configuration options, and it seems there aren't many ways to set this up directly from the device. If you're looking for the most affordable option, consider using a mobile hotspot or a Wi-Fi extender to improve your internet connection before connecting your PC. Otherwise, you might need to upgrade your router or use a different setup method.
I’d connect an ESP8266 and employ a relay board to control the power switch on the computer.
A Wi-Fi managed power outlet might not be able to start the PC, possibly shutting it down instead. Please verify your setup and consider a specific model for reference.
On many motherboards you can configure how the system behaves when power is restored after a loss, choosing options like stay off, power on, or reverting to the last known state. Setting it to power on will trigger the PC to restart once power is cut back. Of course, only perform this after safely shutting down the machine. Since your power supplies are a local brand, they may not be compatible. The setting on my main PC is configured to cut power when output drops below 70W, ensuring my entire desk powers off and resets for remote startup.
I found my answer. Initially, I realized the router (Deco X20) couldn't assign MAC addresses to the ARP list. Then I considered what Omega suggested—it was too complex for me. Lacking soldering and programming experience, I experimented with an Android TV box. It worked with apps like AnyDesk and Tasker, but it felt clunky. Using the TV box, I had a breakthrough: I connected a device to my network to send a "magic package" that would power on my PC. I discovered a Skill/guide for Alexa (Echo Dot) that lets me control my PC remotely. I found a helpful video showing how to use the Alexa app from my phone anywhere and turn on my PC. That’s how I solved it! Thanks everyone for your help.