You might need to check if the missing standoffs affect your build.
You might need to check if the missing standoffs affect your build.
Will there be any grounding issues? I highlighted the missing ones. Thanks.
It might work, but it's better to place the standoffs where you have the heaviest load on the board. For example, move the one in the bottom left to the center right. Why is it still missing?
In certain situations, there are no suitable mounting spots in those areas. If this occurs, you must exercise extreme caution when supporting the board while connecting the ATX port and RAM (it’s usually safer to install the RAM first before putting it in the case). Otherwise, everything should be okay.
I will take care to place the atx connector correctly. The RAM was already in place while the motherboard was outside the case. Thank you.