You adjust Fan curves through the RBG fan control hub's interface, typically via its web portal or companion app.

F5F Stay Refreshed Hardware Desktop You adjust Fan curves through the RBG fan control hub's interface, typically via its web portal or companion app.

A_Sound
Senior Member

486

03-13-2023, 11:39 AM

The motherboard can manage the fan curve without needing special software.

A_Sound

03-13-2023, 11:39 AM #1

The motherboard can manage the fan curve without needing special software.

Karriz
Member

210

03-13-2023, 12:24 PM

It varies. Certain fan control hubs include a 4-pin connector that links to a motherboard header. They function without software. If the hub lacks this feature, you'll need software to manage it.

Karriz

03-13-2023, 12:24 PM #2

It varies. Certain fan control hubs include a 4-pin connector that links to a motherboard header. They function without software. If the hub lacks this feature, you'll need software to manage it.

Surdaniel
Member

03-13-2023, 12:38 PM

If it doesn't receive the PWM signal from the motherboard, it won't be manageable through any software. Occasionally it arrives with a remote.

Surdaniel

03-13-2023, 12:38 PM #3

If it doesn't receive the PWM signal from the motherboard, it won't be manageable through any software. Occasionally it arrives with a remote.

toniogill
Junior Member

03-14-2023, 06:18 AM

Some fans use USB2 connections for MB and rely on software like Corsair Commander Pro to manage them.

toniogill

03-14-2023, 06:18 AM #4

Some fans use USB2 connections for MB and rely on software like Corsair Commander Pro to manage them.

Roxo_Fox
Junior Member

03-15-2023, 11:19 PM

Many devices link through a USB header, enabling custom firmware to manage fans. NZXT frequently uses this approach. However, units that aren't physically connected to the motherboard can't be controlled via software.

Roxo_Fox

03-15-2023, 11:19 PM #5

tristan42
Member

109

03-29-2023, 01:00 PM

Yes, you must get the signal from your motherboard.

tristan42

03-29-2023, 01:00 PM #6

Yes, you must get the signal from your motherboard.

Fabista
Member

175

03-29-2023, 04:52 PM

For the RAIDMAX X603, I plan to swap in higher-quality fans that aren't RGB. Before doing so, I need to understand the current fan layout and the hub configuration. This will help me locate the correct spots on the motherboard for the new fans and where to remove the control hub.

Fabista

03-29-2023, 04:52 PM #7