Yes, you can utilize a managed switch within an ONT environment.
Yes, you can utilize a managed switch within an ONT environment.
What kind of network model are we talking about? It handles NAT and routing. You’d want the T3200M and the built-in Wi-Fi, but ideally a single router would be better.
I need to relocate the Nokia 0-221H since the existing cable to the T3200M is only CAT4. With a gigabit internet connection, I plan to switch to a CAT 6 cable for better performance.
I can't get rid of the T3200M because it's essential for Optik TV. No other devices support it. I understand you might be able to run an unmanaged switch on the ONT and link separate routers to it, but I'm unsure if a managed switch would work since it would require its own IP address.
Using a managed switch with standard configurations behaves identically to an unmanaged one. At a minimum, it can route traffic effectively.
A managed switch functions similarly to an unmanaged one, but its behavior depends on your setup. It usually comes with its own IP address, though it’s not mandatory. Many include a management port or you can assign a separate VLAN or subnet for management purposes. However, using just one device plugged in doesn’t limit it to a single port—it behaves more like a basic 2-port switch. You might be wondering why you need this switch at all. Simply search for "t3200m wifi" online to see how switches can assist with your needs.
They installed cat 5 Ethernet, not the newer cat 5e standard. The connection is limited to 100 megabits per second. You want a switch to connect cat 5e or cat 6 cables to the Wi-Fi network temporarily until a permanent solution is set up.
A coupler could also be used in this setup. Cat 5 can usually support gigabit speeds, especially over short distances. Wouldn't it be simpler to connect the Cat 5e straight into the Google Wi-Fi? A network diagram would help clarify how everything connects.