Yes, you can overclock your E2200.
Yes, you can overclock your E2200.
Sure, you can try adjusting the BIOS settings or using a more powerful CPU cooler to improve performance. Also, consider checking for any firmware updates for your motherboard and GPU drivers.
You've likely hit the maximum performance for that processor and its configuration. If voltage tweaks don't help, you're at the hardware ceiling. For better speed, switching to an SSD could make a noticeable difference, even on older machines with modest speeds.
I already have an SSD but it only works with SATA 3.0, there are no 6.0 ports available, and I can't even adjust the voltage.
It's really wasteful stuff. Just slap in a budget 2D like e74/500 and boost it, but the FSB speeds on these MSDI boards are low. My G31M S2C handles around 542 FSB (about 440 stable with voltage limits), and the latest hardware benchmark for this board is 388 FSB. If you had something better like P5KPL or the G31M Gigabyte board, I’d suggest a budget E8400 E7X CPU. They’ll run fine at lower FSB thanks to their higher multipliers, and these parts are cheap—expect to pay a fortune for them.
I just discovered a biostar g41d3+ with a 775 rating, and it seems DDR3 could work for it.
These chipsets range from the worst to the best FSB overclocking potential. G/P41-G/P/Q43-Q45-G45-G/P31-G33/Q33/35-G35-X38-P35-X48-P45. The G31 is solid, handling most builds well despite its brick walled nature. G31 offers ~440 stable clocks, making it a solid upgrade for most users.