F5F Stay Refreshed Hardware Desktop Yes, it's possible to overclock the Corsair Vengeance DDR4-3600 CL18.

Yes, it's possible to overclock the Corsair Vengeance DDR4-3600 CL18.

Yes, it's possible to overclock the Corsair Vengeance DDR4-3600 CL18.

X
xX_IceyWolf_Xx
Senior Member
629
03-13-2020, 07:47 AM
#1
I'm checking the setup: AMD Ryzen 5 5600X with ASRock B550M Pro4, Corsair Vengeance LPX 32 GB RAM at 3600 MHz. Can you confirm if using DDR4-3600 CL16 is feasible? If yes, what should be the CL18 setting in the UEFI?
X
xX_IceyWolf_Xx
03-13-2020, 07:47 AM #1

I'm checking the setup: AMD Ryzen 5 5600X with ASRock B550M Pro4, Corsair Vengeance LPX 32 GB RAM at 3600 MHz. Can you confirm if using DDR4-3600 CL16 is feasible? If yes, what should be the CL18 setting in the UEFI?

K
khaledkb_
Senior Member
724
03-15-2020, 12:30 AM
#2
Can't promise it will function but those patterns usually appear in kits. It doesn't really matter as long as the first number is 16, followed by the same next, then the last one, and the second digit of the final number determines it (like 16, 17, 17, 37).
K
khaledkb_
03-15-2020, 12:30 AM #2

Can't promise it will function but those patterns usually appear in kits. It doesn't really matter as long as the first number is 16, followed by the same next, then the last one, and the second digit of the final number determines it (like 16, 17, 17, 37).

E
eduardodd08
Posting Freak
852
03-29-2020, 01:50 AM
#3
I tested 16, 16, 16, 36 and the PC didn't even start properly. The fans kept running at full speed all the time. Luckily I had an old spare jumper—my only chance to reset the board! I’ll probably go with the CL18 now.
E
eduardodd08
03-29-2020, 01:50 AM #3

I tested 16, 16, 16, 36 and the PC didn't even start properly. The fans kept running at full speed all the time. Luckily I had an old spare jumper—my only chance to reset the board! I’ll probably go with the CL18 now.

C
CiscoMiner
Senior Member
500
03-29-2020, 02:23 AM
#4
Also, you can clear the board by taking out the C battery
C
CiscoMiner
03-29-2020, 02:23 AM #4

Also, you can clear the board by taking out the C battery