F5F Stay Refreshed Hardware Desktop Yes, it's fine with 8 GB plus 8 GB plus 16 GB of RAM.

Yes, it's fine with 8 GB plus 8 GB plus 16 GB of RAM.

Yes, it's fine with 8 GB plus 8 GB plus 16 GB of RAM.

Pages (3): Previous 1 2 3
X
xanderzone317
Posting Freak
957
07-15-2022, 01:41 PM
#21
Yes, it seems the motherboard includes a Flex Mode feature to achieve this.
X
xanderzone317
07-15-2022, 01:41 PM #21

Yes, it seems the motherboard includes a Flex Mode feature to achieve this.

R
Rhuji
Senior Member
437
08-06-2022, 09:34 AM
#22
It can also support partial dual channel configurations, such as combining 1x8 and 1x16 for a total of 16GB using dual channels plus 8GB in single-channel mode.
R
Rhuji
08-06-2022, 09:34 AM #22

It can also support partial dual channel configurations, such as combining 1x8 and 1x16 for a total of 16GB using dual channels plus 8GB in single-channel mode.

C
Chito25
Member
57
08-15-2022, 08:53 AM
#23
Update Hi, thanks for all the suggestions. I took a 16GB 3600mhz CL18 from my friend to check if I could use 3 sticks and still run duel channels. its showing 3200Mhz in the taskManager but different in CPU-Z (does that mean its prob not running at 3200mhz?
C
Chito25
08-15-2022, 08:53 AM #23

Update Hi, thanks for all the suggestions. I took a 16GB 3600mhz CL18 from my friend to check if I could use 3 sticks and still run duel channels. its showing 3200Mhz in the taskManager but different in CPU-Z (does that mean its prob not running at 3200mhz?

C
CrimsonZel
Member
53
08-15-2022, 05:44 PM
#24
Don't suggest it, but verify identical RAM levels across all channels.
C
CrimsonZel
08-15-2022, 05:44 PM #24

Don't suggest it, but verify identical RAM levels across all channels.

3
3MO
Member
53
08-15-2022, 10:40 PM
#25
The system displays accurate metrics, specifically the data throughput. Given the DDR architecture, which supports dual data rates, the reported value should be multiplied by two. Therefore, 1600 becomes 3200, confirming the calculation is correct.
3
3MO
08-15-2022, 10:40 PM #25

The system displays accurate metrics, specifically the data throughput. Given the DDR architecture, which supports dual data rates, the reported value should be multiplied by two. Therefore, 1600 becomes 3200, confirming the calculation is correct.

Pages (3): Previous 1 2 3