F5F Stay Refreshed Hardware Desktop Yes, it's a good RAM OC.

Yes, it's a good RAM OC.

Yes, it's a good RAM OC.

I
IAmKillerham
Senior Member
252
06-22-2020, 06:49 PM
#1
Hi, your setup looks promising. The XMP settings you applied seem well-chosen for your hardware. Running at 4266 MHz with a stable configuration suggests good performance. Since you're using the Z490 and an i5-10400F, the values you're seeing are within typical ranges. Just keep an eye on temperatures and stability over time. If everything holds after the test, it's likely a solid overclock.
I
IAmKillerham
06-22-2020, 06:49 PM #1

Hi, your setup looks promising. The XMP settings you applied seem well-chosen for your hardware. Running at 4266 MHz with a stable configuration suggests good performance. Since you're using the Z490 and an i5-10400F, the values you're seeing are within typical ranges. Just keep an eye on temperatures and stability over time. If everything holds after the test, it's likely a solid overclock.

W
WizGhalika
Junior Member
20
06-22-2020, 07:43 PM
#2
Your overclocking is essentially useless, yet it's still a really solid performance boost.
W
WizGhalika
06-22-2020, 07:43 PM #2

Your overclocking is essentially useless, yet it's still a really solid performance boost.

B
brobear7
Posting Freak
892
06-22-2020, 08:28 PM
#3
It makes no sense if you're just starting out. Let me break it down simply for you.
B
brobear7
06-22-2020, 08:28 PM #3

It makes no sense if you're just starting out. Let me break it down simply for you.

X
xXColinLpXx
Junior Member
13
06-23-2020, 04:40 PM
#4
Beyond that threshold, increased RAM speed offers little real advantage for most people—it's mainly about show-off purposes.
X
xXColinLpXx
06-23-2020, 04:40 PM #4

Beyond that threshold, increased RAM speed offers little real advantage for most people—it's mainly about show-off purposes.

W
Wqmb
Member
137
06-30-2020, 11:00 PM
#5
Sure, let me know when you'd like me to reply!
W
Wqmb
06-30-2020, 11:00 PM #5

Sure, let me know when you'd like me to reply!

T
TheExmax223
Member
132
07-01-2020, 02:19 AM
#6
If you set the speed to 3600 or 3200, tightening the timing will likely improve performance in that scenario.
T
TheExmax223
07-01-2020, 02:19 AM #6

If you set the speed to 3600 or 3200, tightening the timing will likely improve performance in that scenario.

B
Bayan9
Member
158
07-02-2020, 12:41 AM
#7
If it were a Ryzen, I’d recommend adjusting the timings. For Intel, they don’t see as much gain from this change.
B
Bayan9
07-02-2020, 12:41 AM #7

If it were a Ryzen, I’d recommend adjusting the timings. For Intel, they don’t see as much gain from this change.

R
RainyToast
Member
78
07-15-2020, 04:22 AM
#8
Alright, I'll keep it simple. Just confirm the details and proceed.
R
RainyToast
07-15-2020, 04:22 AM #8

Alright, I'll keep it simple. Just confirm the details and proceed.