Yes, it is typical for DDR3 memory.
Yes, it is typical for DDR3 memory.
Normal standards vary. DDR3 1600 in QuadCH isn't common; most systems use Dualchannel. x79-x99 and HEDT support Quad channel, though it's less popular. My 2133Mhz Dualchannel setup achieves 33GB/s read, 31GB/s write, and 30GB/s copy (I'd share screens if needed, but the PC is still working).
You're clarifying your request. Essentially, you want a detailed explanation of your setup and some advice for maintaining it.
You might increase the value by including the two additional channels in a Hex-Channel setup. In reality, it doesn't match the performance of a genuine quad-channel method because of the delays between the CPU and CPU.
this setup is single-channel, but a quad channel could theoretically offer four times more bandwidth.
I recall a theoretical bandwidth and I adjusted it from dual channel 3200 to roughly 50GB/s (the exact numbers don't matter for DDR generation, though for DDR5 we need to look at per-module specs because of configuration shifts). The value depends on both channels and the speed, so both factors must be considered. It's also important to remember that the actual performance measured by tools will be less than the full potential.
I realize my mistake, that was from memory. (laughs) First attempt and second try in the Spoiler section.