Yes, it is generally acceptable to use old thermal compound, though its performance may vary.
Yes, it is generally acceptable to use old thermal compound, though its performance may vary.
I discovered some Arctic Silver 5 that I likely purchased six years ago when I experienced heat problems with my laptop. I was curious if anyone knew why it wouldn’t be suitable for a new heat-sink project. I assumed it would be fine, but I’m not very familiar with its composition.
If you try to push the plunger and nothing comes out, don't use it! :lol:
Apologies to OP, I couldn't resist sharing this.
An AS5 from six years ago remains effective as long as it was properly capped and sealed, though many are unaware that the current AS5 is a refined version compared to the one available six years prior.
This knowledge came from a representative of Artic Silver during my Thermal Roundup.
Arctic Silver 5 offers excellent thermal performance, making it a great choice for a well-preserved used item that remains functional without becoming brittle.
as long as it isn't too dense, you need it to spread and become lighter. if it's as thick as toothpaste, switch to something else.
If you try to push the plunger and nothing comes out, don't use it! :lol:
Apologies to OP, I couldn't resist sharing this.
An AS5 from six years ago remains effective as long as it was properly capped and sealed, though many are unaware that the current AS5 is a refined version compared to the one available six years prior.
This knowledge came from a representative of Artic Silver during my Thermal Roundup.
No, if it's on the CPU cooler and somewhat dried out, you understand what I'm saying? IF it's really very old and chalky, then I'd suggest cleaning it off. I used toothpaste instead of the thermal paste, and the idle dropped by about 5 degrees. It improves as it gets newer, especially if it stays sealed.