Yes, it is feasible to configure a mesh network using a distinct dedicated 2.4GHz band.
Yes, it is feasible to configure a mesh network using a distinct dedicated 2.4GHz band.
I’m using an Xfinity prepaid router instead of a dual-band model. The router and repeater are assigned different frequency bands, and the repeater seems to handle the 2.4GHz channel. I’m not sure what a switch does, but it appears the extender behaves more like a repeater. It’s unclear if there’s an easy way to connect cables directly; perhaps using the attic space could work better. I know the TV has a coax cable in the attic that links to this part of the house, which is currently used for the TV signal. The distance from my room to the router is roughly 800 feet with a brick wall separating them. The Wi-Fi extender operates as a repeater about 500 feet away, but it’s mostly a direct path—signal likely needs to reflect off walls or pass through drywall to reach the repeater.
Repeating the same band usage can lead to complications. To divide the radios, use the smartphone app. If you changed the extender’s SSID, simply assign your main routers the same 2.4GHz band and turn off the extender so it reconnects to the network. Also verify if your router supports client isolation—likely it should be disabled so devices on 5GHz can communicate with those on 2.4GHz.
You can manage jitter by ensuring stable connections and possibly upgrading your setup. For slower speeds from a Wi-Fi repeater, consider investing in better equipment or optimizing your network configuration.
The goal is to avoid repeaters entirely. Assign one name to bandwidth-intensive equipment on 5GHz and another for 2.4GHz devices that require less data. If that doesn't work, connect a dedicated WiFi access point or router/repeater via Ethernet. For a basic smart switch, range shouldn't be a problem since 2.4GHz can cover several miles at the slow speeds smart gadgets use—unless building materials are obstructing the signal.
I realized I should still have the repeater for 2.4GHz in my room. Probably, if I want faster internet for gaming, I should move closer to the router and use 5GHz. My parents might need to stay on the 2.4GHz network so they can use the Chromecast effectively.
No possibility to hard-wire a dual-band repeater closer to your room? The performance would be a lot better. Flat ethernet cables can be very useful for hiding around the perimeter of rooms and even under doors if the gap is big enough.
I reside with my parents, and my mom blocked any plan to run wires in their home.