Yes, I have a question.
Yes, I have a question.
I recently started building my PC from scratch. Everything seemed to function properly until the RAM failed. I purchased a 16GB DDR4 kit (two 8GB sticks). GSKill RipJaws worked, but the task manager showed only 8.1 GB available, so I used 7.9 GB for dual-channel configuration. I searched YouTube and found a solution, but it didn’t help me. I dug deeper on Google/YouTube and discovered that a BIOS update might resolve the issue. I followed the instructions carefully, and after finishing, the system didn’t boot. The motherboard beeped three times repeatedly. Eventually, I pressed and held the power button, which stopped the beeping. To shut down the PC, I had to flip the power supply switch. Then I tried removing one stick of RAM, but it still beeped and displayed a black screen. After replacing the RAM, everything worked normally. I’m confused because the problem disappeared only after updating the BIOS.
You should notice around 16 GB of storage regardless of whether it's single or dual channel. Verify the drives are placed correctly in their designated slots—typically the one farthest from the CPU socket, leaving a gap between the first and second stick if applicable. Check the sticks for any issues before proceeding. It’s simple: install one at a time and see if the system powers up. Create a bootable USB with MemTest86 here: https://www.memtest86.com/download.htm or use the open-source version at https://www.memtest.org/#downiso. Your motherboard will likely set the speed to 2133 or 2400 MHz, but you should adjust it in BIOS to 3200 or 3600 MHz if needed.
I attempted to use the alternative stick, but it wouldn't boot. Even when I moved the slots or adjusted positions, it still wouldn't work. I followed your instructions to install RAM in one slot farthest from the CPU and left the other empty. After that, the PC functioned properly with a single RAM stick. I can share my system specs now. If needed, I recommend checking the BIOS settings and enabling XMP to reach 3200MHz. Thank you for your help!