F5F Stay Refreshed Hardware Desktop Yes, an X79 motherboard can accommodate 24GB RAM and operate in dual-channel mode.

Yes, an X79 motherboard can accommodate 24GB RAM and operate in dual-channel mode.

Yes, an X79 motherboard can accommodate 24GB RAM and operate in dual-channel mode.

D
Durif
Member
125
01-10-2016, 05:18 PM
#1
Check the motherboard compatibility with your RAM and storage. A 2x8GB drive works well, but ensure it supports dual-channel operation. If you need more RAM, consider a board with four DIMM slots for better performance. The price difference is minimal, so prioritize the needed features.
D
Durif
01-10-2016, 05:18 PM #1

Check the motherboard compatibility with your RAM and storage. A 2x8GB drive works well, but ensure it supports dual-channel operation. If you need more RAM, consider a board with four DIMM slots for better performance. The price difference is minimal, so prioritize the needed features.

O
OldTwiist
Member
137
01-12-2016, 12:52 AM
#2
The CPU's memory controller is the one that needs to support it. I don't see why it shouldn't support 24 GB, and since each stick is paired with an equally sized one, they should all run in dual channel. Make sure the new RAM has the same frequency and latency (CL) as your existing RAM.
O
OldTwiist
01-12-2016, 12:52 AM #2

The CPU's memory controller is the one that needs to support it. I don't see why it shouldn't support 24 GB, and since each stick is paired with an equally sized one, they should all run in dual channel. Make sure the new RAM has the same frequency and latency (CL) as your existing RAM.

C
cptprice848
Member
55
01-12-2016, 12:13 PM
#3
Could there be an issue if their latency levels differ? The 2x8 supports CL 12, while your current 2x4 is CL 11. This gap might lead to performance problems like BSOD if not addressed. The 2x4GB drive should adapt to CL 12, but compatibility depends on the system setup.
C
cptprice848
01-12-2016, 12:13 PM #3

Could there be an issue if their latency levels differ? The 2x8 supports CL 12, while your current 2x4 is CL 11. This gap might lead to performance problems like BSOD if not addressed. The 2x4GB drive should adapt to CL 12, but compatibility depends on the system setup.

R
Rxnger
Member
198
01-12-2016, 01:00 PM
#4
They should simply proceed with the increased latency. However, there remains a small chance it might not function.
R
Rxnger
01-12-2016, 01:00 PM #4

They should simply proceed with the increased latency. However, there remains a small chance it might not function.

D
Dun_Schmud
Junior Member
22
01-12-2016, 04:17 PM
#5
I believe I should choose the model with two slots, use two 8GB units, and sell the 4GB unit to my brother. He’ll likely build a PC soon, and I don’t want my hard-earned money to go to waste. I’m not taking any chances, thanks for helping me out!
D
Dun_Schmud
01-12-2016, 04:17 PM #5

I believe I should choose the model with two slots, use two 8GB units, and sell the 4GB unit to my brother. He’ll likely build a PC soon, and I don’t want my hard-earned money to go to waste. I’m not taking any chances, thanks for helping me out!