XMP setting 1.35v operating at 1.40v

F5F Stay Refreshed Hardware Desktop XMP setting 1.35v operating at 1.40v

ZexyZeke
Member

166

07-19-2023, 06:08 PM

Hey everyone, the specs look correct for your setup. The 1.35V CL17 rating should work with XMP profiles at 3600MHz. The Windows versions you mentioned (1.39–1.41) might be outdated or incorrect—check the latest drivers or settings for accuracy.

ZexyZeke

07-19-2023, 06:08 PM #1

the_one_waffle
Member

199

07-24-2023, 10:45 AM

Certain kits need manual adjustments for timing and voltage. One unit I own was QVL'd for the board but still couldn’t auto-set the right DOCP values, so I had to configure them myself. Also, a RAM kit that isn’t QVL'd might behave oddly, such as inserting multiple DIMMs at varying speeds.

the_one_waffle

07-24-2023, 10:45 AM #2

xXFirewitherXx
Posting Freak

878

07-24-2023, 11:12 AM

You should adjust the RAM voltage manually by accessing your motherboard's BIOS settings or using the appropriate control in your system's power management interface.

xXFirewitherXx

07-24-2023, 11:12 AM #3

You should adjust the RAM voltage manually by accessing your motherboard's BIOS settings or using the appropriate control in your system's power management interface.

Sebas_04
Member

07-24-2023, 07:19 PM

You have the option, though enabling XMP might need turning it off. This usually involves adjusting the timing settings yourself. Be sure you understand the meaning of each setting and its location in the BIOS, or you risk unwanted outcomes.

Sebas_04

07-24-2023, 07:19 PM #4

raider112233
Member

168

07-29-2023, 02:35 AM

Current reading is 1.55 in 24/24 pcs. Everything should be fine.

raider112233

07-29-2023, 02:35 AM #5

Current reading is 1.55 in 24/24 pcs. Everything should be fine.