F5F Stay Refreshed Hardware Desktop XMP isn't functioning as expected.

XMP isn't functioning as expected.

XMP isn't functioning as expected.

L
LifelessShadow
Member
166
09-20-2021, 10:29 AM
#1
Your system is set up for a different RAM speed than what the motherboard supports. You need to adjust the BIOS settings or use a compatible RAM module that matches the 3200MHz specification. Check your motherboard manual for instructions on changing the XMP profile or updating it to the correct frequency.
L
LifelessShadow
09-20-2021, 10:29 AM #1

Your system is set up for a different RAM speed than what the motherboard supports. You need to adjust the BIOS settings or use a compatible RAM module that matches the 3200MHz specification. Check your motherboard manual for instructions on changing the XMP profile or updating it to the correct frequency.

L
Luki14022002
Junior Member
4
09-20-2021, 02:00 PM
#2
Activate XMP, adjust DRAM voltage to 1.45, and verify stability.
L
Luki14022002
09-20-2021, 02:00 PM #2

Activate XMP, adjust DRAM voltage to 1.45, and verify stability.

K
kotomchi
Member
61
09-20-2021, 08:04 PM
#3
Is 1.45 safe, if they advertised it on 1.35?
K
kotomchi
09-20-2021, 08:04 PM #3

Is 1.45 safe, if they advertised it on 1.35?

W
Waverabbit
Senior Member
643
09-20-2021, 09:14 PM
#4
No, I didn't specify the stick levels. Please confirm the correct configuration for A2 & B2 or A1 & B1.
W
Waverabbit
09-20-2021, 09:14 PM #4

No, I didn't specify the stick levels. Please confirm the correct configuration for A2 & B2 or A1 & B1.

R
Raqet
Member
222
09-21-2021, 06:13 AM
#5
They are located in A1 and B1.
R
Raqet
09-21-2021, 06:13 AM #5

They are located in A1 and B1.

I
ItsTheSoul
Senior Member
410
10-07-2021, 11:36 AM
#6
Only a few sticks needed for A2 and B2. Insert the DIMMs into the correct holes, and observe the effect.
I
ItsTheSoul
10-07-2021, 11:36 AM #6

Only a few sticks needed for A2 and B2. Insert the DIMMs into the correct holes, and observe the effect.

A
alevy3131
Member
156
10-07-2021, 06:21 PM
#7
You might have a defective RAM module. Continue testing each stick individually. If one works while the other doesn't, the faulty one is likely the cause, and you may be eligible for a return refund.
A
alevy3131
10-07-2021, 06:21 PM #7

You might have a defective RAM module. Continue testing each stick individually. If one works while the other doesn't, the faulty one is likely the cause, and you may be eligible for a return refund.

C
CosmicGamerHQ
Member
59
10-09-2021, 08:23 AM
#8
This occurred with G Skill ram too. Only booting at 2133 XMP worked, but the system would crash afterward.
C
CosmicGamerHQ
10-09-2021, 08:23 AM #8

This occurred with G Skill ram too. Only booting at 2133 XMP worked, but the system would crash afterward.