F5F Stay Refreshed Hardware Desktop Xbox One X switches on and off within five seconds

Xbox One X switches on and off within five seconds

Xbox One X switches on and off within five seconds

T
168
12-30-2017, 10:52 AM
#1
In summary, I’ve noticed my Xbox One X powers on and off within five seconds. After plugging it in and pressing the button, it only makes a short beep. Repeated attempts show it briefly lights up before shutting down again. I suspect the power supply fan might not be receiving enough power, possibly causing overheating, though the processor seems cool. After replacing thermal paste, pads, and installing an SSD for speed, the issue persists. I’m unsure what caused it, but I’m considering a software glitch. Thanks to everyone who helped resolve this.
T
TravelingWater
12-30-2017, 10:52 AM #1

In summary, I’ve noticed my Xbox One X powers on and off within five seconds. After plugging it in and pressing the button, it only makes a short beep. Repeated attempts show it briefly lights up before shutting down again. I suspect the power supply fan might not be receiving enough power, possibly causing overheating, though the processor seems cool. After replacing thermal paste, pads, and installing an SSD for speed, the issue persists. I’m unsure what caused it, but I’m considering a software glitch. Thanks to everyone who helped resolve this.

M
MHxHimhim
Junior Member
44
01-06-2018, 10:32 PM
#2
Are you certain the screw wasn’t caught in an unexpected spot? Or could your removal have damaged any components, particularly the X-clamps? Many users have reported similar issues from improper disassembly.
M
MHxHimhim
01-06-2018, 10:32 PM #2

Are you certain the screw wasn’t caught in an unexpected spot? Or could your removal have damaged any components, particularly the X-clamps? Many users have reported similar issues from improper disassembly.

I
ImperialNerF
Member
68
01-06-2018, 11:36 PM
#3
The screws should fit well once reassembled. I recall possibly a year ago using the x clamps, which were difficult to open, but it functioned properly then. I suspect the problem might be software-related. The target offers a great deal on a series S for 200 dollars, so if this fails, I’ll have a solid alternative plan.
I
ImperialNerF
01-06-2018, 11:36 PM #3

The screws should fit well once reassembled. I recall possibly a year ago using the x clamps, which were difficult to open, but it functioned properly then. I suspect the problem might be software-related. The target offers a great deal on a series S for 200 dollars, so if this fails, I’ll have a solid alternative plan.

X
xPumma
Member
186
01-07-2018, 06:46 AM
#4
You might consider installing the HDD if you still have one. I haven’t noticed any software problems or failed drives making the console stop working, though it’s possible.
X
xPumma
01-07-2018, 06:46 AM #4

You might consider installing the HDD if you still have one. I haven’t noticed any software problems or failed drives making the console stop working, though it’s possible.

S
Silvinha10
Senior Member
694
01-07-2018, 03:04 PM
#5
I have a 240gb SSD that I haven't used. It might be worth testing it out to see how it performs. I connected the external drive, which powers it up. Then I inserted a disc, and it spun briefly before shutting down.
S
Silvinha10
01-07-2018, 03:04 PM #5

I have a 240gb SSD that I haven't used. It might be worth testing it out to see how it performs. I connected the external drive, which powers it up. Then I inserted a disc, and it spun briefly before shutting down.

L
217
01-15-2018, 09:18 AM
#6
I removed all components from the Xbox, picked up the motherboard power button board and power supply, and attempted to power it on. The CPU area felt extremely hot, especially since there was no heat sink installed. It seems the device was indeed very hot at startup.
L
lol_Angela_lol
01-15-2018, 09:18 AM #6

I removed all components from the Xbox, picked up the motherboard power button board and power supply, and attempted to power it on. The CPU area felt extremely hot, especially since there was no heat sink installed. It seems the device was indeed very hot at startup.