x570D.O.C.P issue with Asus Tuf X570 Gaming Plus Wi-Fi

Pages (3): 1 2 3 Next

VladexFTW
Junior Member

10-28-2019, 02:06 AM

Hey everyone. Just a few days ago I assembled my first PC. Everything went smoothly except for the RAM XMP setting or what Asus calls D.O.C.P. I have two 8GB Ballistix Elite sticks, which function at 2600Mhz on the stock configuration. No matter what adjustments I made, the system couldn't boot with the required D.O.C.P. My BIOS is version 1405, which is the newest release. I'm really let down because I was expecting those high-speed RAMs to greatly improve performance.

VladexFTW

10-28-2019, 02:06 AM #1

QMBI
Junior Member

10-30-2019, 12:49 PM

No, I haven't tried to adjust the values manually.

QMBI

10-30-2019, 12:49 PM #2

No, I haven't tried to adjust the values manually.

GuysWhoGame
Junior Member

10-30-2019, 01:22 PM

I didn't have time to configure all the settings, but I attempted to adjust the timings and clock speeds by hand. It didn't work.

GuysWhoGame

10-30-2019, 01:22 PM #3

I didn't have time to configure all the settings, but I attempted to adjust the timings and clock speeds by hand. It didn't work.

yNetFlix
Member

187

10-30-2019, 03:25 PM

Confirmed if we use DRAM speed as the reference (1:2 ratio). Adjusting main timing parameters slightly could help. Clocks and timing refer to the signal cycles and synchronization intervals in the system.

yNetFlix

10-30-2019, 03:25 PM #4

MaGixZz
Junior Member

10-31-2019, 06:35 PM

Even without D.O.C.P. enabled, entering values manually isn't functioning. You may need to return these modules for repair.

MaGixZz

10-31-2019, 06:35 PM #5

Even without D.O.C.P. enabled, entering values manually isn't functioning. You may need to return these modules for repair.

Dbb717
Junior Member

11-01-2019, 11:38 AM

Adjust the RAM to 3600, then use half that amount. I also attempted the same approach, but it didn’t work.

Dbb717

11-01-2019, 11:38 AM #6

Adjust the RAM to 3600, then use half that amount. I also attempted the same approach, but it didn’t work.

stampy1nose
Member

11-01-2019, 08:15 PM

I reside in another nation, and sending the item back to the USA would be extremely difficult.

stampy1nose

11-01-2019, 08:15 PM #7

I reside in another nation, and sending the item back to the USA would be extremely difficult.

TheRedPhoenixx
Member

11-09-2019, 10:57 AM

You asked about the timing settings and suggested a more relaxed schedule like 20-22-22-22-46.

TheRedPhoenixx

11-09-2019, 10:57 AM #8

You asked about the timing settings and suggested a more relaxed schedule like 20-22-22-22-46.

ExlonTrantos
Member

215

11-10-2019, 06:42 PM

They seemed around 16-16-17-18-38. I’m not able to finish right now, but I’ll focus on it this weekend.

ExlonTrantos

11-10-2019, 06:42 PM #9

They seemed around 16-16-17-18-38. I’m not able to finish right now, but I’ll focus on it this weekend.

vaentina189
Junior Member

11-11-2019, 02:28 AM

#10

It fits better than typical ratings (16-19-19-39), which explains why it isn’t working. Try checking the CMOS settings and see if DOCP appears. By the way, DOCP stands for AMD’s XMP profile.

vaentina189

11-11-2019, 02:28 AM #10

It fits better than typical ratings (16-19-19-39), which explains why it isn’t working. Try checking the CMOS settings and see if DOCP appears. By the way, DOCP stands for AMD’s XMP profile.

Pages (3): 1 2 3 Next