X570 equipped with 3800X and no post-processing.
X570 equipped with 3800X and no post-processing.
Hello, I recently purchased a X570S Aorus PRO AX. It comes with a NZXT H510 elite, 16GB RAM ballistix sport (2x8GB), 16GB RAM RGB HyperX (2x8GB), Ryzen 7 3800X, a Radeon RX6700XT, watercooling NZXT X63, one HDD (1TB), one SSD 2.5TB (NVMe 500GB, Windows version), and a NVMe 1TB Samsung drive. I also acquired a Corsair TX650M power supply (650W). My build uses this configuration and everything functions normally. The DRAM LED remains red consistently. Despite testing various RAM options, the issue persists. My existing X470 still works fine. For the CPU cable, I use an 8-pin connector instead of a 12-pin one. While I’ve heard no issues with that setup, I thought it worth noting.
They're referred to as A2 and B2. It's the one farthest from the CPU and the second one from that point. Also attempt to reset CMOS. The 8-pin CPU power is acceptable.
I tested all slots using each RAM in every setup and still no results...